MrSpeakers AEON Quick User Manual

Features
• Driver: 62mm x 34mm MrSpeakers designed single-ended
planar magnetic
• Nitinol "Memory Metal" headband
• Premium quality leather comfort strap
Quick User Guide
• Synthetic protein earpads
• Matched drivers:+/ -1.5 dB between 30 and 5,000 Hz
Safety Instructions
• Read instruction manual carefully and completely before
using this headphone.
• Keep the headphone, accessories and packaging parts out
of reach of pets and children. This product contains small
parts which may present a choking hazard.
• Use only attachments, accessories, and spare parts supplied
or recommended by MrSpeakers.
• Protect your hearing from high volume levels. Permanent
hearing damage can occur when headphones are used at
high volume levels for extended periods of time.
• Do not expose headphone or accessories to extreme
temperatures.
• Always keep headphone dry.
Headphone Fit Adjustments
'
~./Boot
Metal~t
<
Adjust slider up or down
on both left and right sides
for proper fit.
You can adjust the fit of your heaphone by re-positioning the
headband slider. To adjust the headband, move the plastic
sliders up or down until you achieve your desired fit. It may be
necessary to remove thick glasses or hats to achieve a proper
seal between your head and ear pad. An improper fit can
cause a bad seal, resulting in poor bass response.
Tip: Try inserting the arms of your glasses into the top of the
ear pad instead of resting them directly on your ears.
Attaching a Cable
All MrSpeakers planar-magnetic products use Hirose-style
connectors. To attach your cable, hold the male connector by
the boot and rotate it into the female receptacle on the
headphone until you feel it click into place. To release the
cable, pull down on the top of the connector's metal jacket.