CE marking declaration. Upholstery Care and Cleaning ......... Product Maintenance and Inspection Record ....RMS Ltd. reserves the right to change without notice, the design, methods of Warranty Statement ............marley manufacture, or any materials used in the construction of the...
Any defects should be reported to the appropriate authority, with any repairs Seat Width being carried out using genuine original equipment replacement parts, available (with Pelvic Supports fitted) direct from RMS Sales. Seat Depth (Also refer to Upholstery Maintenance section). INSPECTION RECORD...
Use cold water for stains produced by bodily fluids, then rinse Padded Backrest thoroughly, followed by drying with a clean absorbent cloth. Lateral Supports marley (Optional With the vacated, Light Steam Cleaning can be carried out in situ,...
SAFETY GUIDELINES HARNESS No Tools Required: Due to the various activities a Stroller user and their carer may have to perform, marley marley RMS Ltd IMPORTANT NOTE: The Harness is intended for postural support recommends that prior to issuing the Stroller, this manual be only.
Page 7
marley Partially separate the backrest upholstery from the backrest panel, sufficient to The parking brakes should always be applied whenever parking the gain access to the relevant mounting slots for the Lateral Supports.
FOLDING the BACK EXTENDER marley Before folding the , apply both Parking Brakes and fold the footrest Back Extender is supplied with fixings. upwards against its support panel. While holding the push handle, release the seat locking mechanism (step 2), then push the push handle forwards until the Tools Required: 10mm Spanner.
FITTING OPTIONAL ACCESSORIES BRAKE OPERATION marley Parking Brakes are easily foot operated as below. ABDUCTOR (Pommel) Abductor supplied with fixings. Brakes ON Brakes OFF Tools Required: 10mm Spanner and 4mm Hexagon Key Locate the two pre-drilled mounting holes at the front of the seat panel.
SEAT DEPTH and PELVIC SUPPORT ADJUSTMENT TRANSPORTATION Tools Required: 10mm Spanner. marley Stroller has been successfully tested to ISO 7176-19 (Wheeled mobility devices for use in Motor Vehicles) Detach and remove the seat cushion. Using a P10—32Kg Test Dummy.
Need help?
Do you have a question about the MARLEY and is the answer not in the manual?
Questions and answers