All rights, including copyright, in the content of this manual are owned or controlled by RASILIENT and protected by copyright. No part of this document may be photocopied, reproduced, or translated into another language without the prior written consent of RASILIENT Systems, Inc.
About This Manual Conventions To make sure that you perform certain tasks properly, take note of the following symbols used throughout this manual. Provides Information to prevent injury in the process of completing a Warning: task. Provides Information to prevent damage to the components in the Caution: process of completing a task.
Safety Symbols The following symbols are placed on some components of the system to alert the user to potential hazards, WARNING: Electric Shock Hazard – To reduce risk of injury from electric shock hazards, do not open this component. WARNING: Contains No User or Field Serviceable Parts – To reduce the risk of injury from electric shock hazards, do not open this component.
Safety Precautions Technician Notes Only authorized technicians should attempt to repair this equipment. Before installing this system, carefully read all the manuals included with the system. All repair procedures allow only module replacement. Because of the complexity of the individual boards and sub-assemblies, no one should attempt to make repairs at the component level or make modifications to any printed wiring board.
Page 10
To reduce the risk of electric shock or damage to the equipment, do not disable the power cord grounding plug. The grounding plug is an important safety feature. Ensure the power cord is inserted into a grounded electrical outlet that is easily accessible at all times.
Regulatory and Integration Information Regulatory Compliance Identification Numbers For the purpose of regulatory compliance certifications and identification, this system is assigned a serial number. This system serial number can be found on the product label, along with the required approval markings and information. When requesting certification information for this product, always refer to this serial number.
Page 12
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Power Cords The power cord set included in the system meets the requirements for use in the country where the system was purchased. If this system is to be used in another country, contact your sales representative to purchase a power cord that is approved for use in that country. The power cord must be rated for the product and for the voltage and current marked on the product's electrical ratings label.
Chapter 1 Introduction Audience Assumptions About This Guide Packing Checklist Specifications System Overview...
Page 15
Introduction 1.1 Audience Assumptions This manual assumes that you are a service technician or network administrator familiar with computer hardware, data storage and network administration terminology and tasks. 1.2 About this Guide AS85 comes with appropriate hardware installed. User only needs to configure IP addresses, install appropriate VMS software to administer and view the cameras.
1.5 System Overview The ApplianceStor 85Ris a modular server system which packs four high performance server modules in a single 2U rack mount platform providing unmatched performance and density. Each module can be used to integrate VMS (Video Management Software), failover, archive, administration and access control servers in a single high density 2U system.
1.8 Right Size The AS85Ris designed for large megapixel deployments and perfectly matched with the high capacity and performancePS5000 IP Storage system. The AS85Rwhen used with PS5000,can scale capacity up to 4.3 PB. The AS85Rprovides unmatched performance density to ensure optimal, cost effective, and dependable video storage 1.9 SSD Drives SSD drives are designed to deliver reliable 24×7 operation and optimized for power consumption,...
1.14 Upgradable AS85Rprovides an expansion slot for future expansion. Additional RAM can be added, up to 32GB of RAM. 1.15 Easy The AS85Rdelivers effortless installation, management and administration. All administration functions assume technicians have basic to no storage knowledge. Once racked, setup time should be 15 minutes or less.
1.18 System Specification Core Technology CPU Type Dual Intel Xeon E5-2620 v4 Broadwell (2.1Ghz) Socket 2 x Socket LGA2011-3 Core Logic Intel® C612 PCH Chipset Bench Mark/Clock speed 19377/2.1 GHz Memory size 16GB (expandable up to 64GB) Memory type DDR4 2133 ECC RDIMM Video Storage Performance Up to 120Mbps /15MBps internal and 720Mbps / 90MBps with PS5000...
Page 21
Compliance Safety US/Canada (UL1950-CSA950) Europe (CE, EN55022 compliance to EU Directive 89/366/EEC& TUV) US (FCC , CFR47 Part 15, Class A) Europe (CE, EN55022 class A & EN55024) Australia (C-TICK), Taiwan (BSMI) Physical Characteristics Dimensions (in./mm) 26" x 16.9" x 1.7" / 660 x 430 x 43.5 Weight 42lbs./19Kg26"...
Chapter 2 AS75 Component Identification Component Identification; 1.19 Front Panel Following figure shows each front panel component: Figure 0 -1: Front Panel Components AS75 User Manual...
1.21 Rear View Following diagram shows the location of all the rear I/O ports on AS85 blades. Power Supplies are also shown. Figure 0 -3:AS85 Rear View Figure 0 -4: AS85 Blade Rear View AS75 User Manual...