Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Sandmartin STT4-HDR
- Page 1 Receiver/Digital Decoder DVB-C Set Top Box Installation Manual & User Manual...
- Page 2 SAFETY PRECAUTION CAUTION: The lightning flash with Warning: The exclamation point within arrowhead symbol, within an To reduce the risk of electric an equilateral triangle is equilateral triangle, is shock, don’t open the cover intended to alert the user to intended to alert the user to or cabinet.
- Page 3 the operating instructions or as marked on the unit. If you are not sure of the type of power supply to your home, consult your local dealer or power company. WARNING: Do not open the housing on this unit, as this may expose you to dangerous voltages and radiation.
- Page 4 Object and Liquid Entry: Never put objects of any kind into this STB through openings, as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill any liquid on the STB. Note: Moisture may be formed inside the unit in the following conditions: When the unit is suddenly moved from a cold environment or an air-condition room to a warm place.
-
Page 5: Table Of Contents
Contents Contents 1. Remote Control & Panel Description..............3 1.1 Front Panel Description ..................3 1.2 Rear Panel Description..................4 1.3 Remote Control Description................... 5 2. Basic Operation ......................7 2.1 Switch on the STB ....................7 2.2 Standby ......................... 8 2.3 MUTE ........................8 2.4 TV/RADIO...................... - Page 6 Contents 5. Tools ........................25 5.1 Information..................... 25 5.2 Factory Default ....................25 5.3 S/W Upgrade by OTA..................26 6. Rec ........................27 6.1 PVR Storage Information................27 6.2 PVR Setting....................28 6.3 Upgrade by USB.................... 28 6.4 Media Management..................28 6.4.1 Media List......................
-
Page 7: Remote Control & Panel Description
Menu Operations 1. Remote Control & Panel Description Front Panel Description 1 Power To switch the STB between the working mode and the standby mode. 2 MENU To enter into the main menu and exit all menus. 3 VOL+/- To change volume to move cursor, change numbers in the menu or to change the choice. -
Page 8: Rear Panel Description
Menu Operations 1.2 Rear Panel Description AC IN HDMI Video / Audio Output Output S/PDIF: Coaxial output for digital audio (AC3) TO TV: Modulator output for the connection to a TV set. VIDEO: Composite video output for connecting to your TV video input jack. AUDIO: HiFi outputs for stereo set. -
Page 9: Remote Control Description
Menu Operations 1.3 Remote Control Description... - Page 10 Menu Operations Power: The power key turns the STB on and off. Mute: This key switches the sound on and off. TV/RADIO: Selects TV or Radio channels. TXT: Used to display the Teletext data. INFO: Shows the information and parameters of current channel. ◄◄...
-
Page 11: Basic Operation
Menu Operations 2. Basic Operation 2.1 Switch on the STB When the STB is first used it will display “Quick Setup” window. You can set Language, First Audio and Second Audio and Country. Also you can search here your channels in “Cable search”. Please press OK and you will see the window “Auto Scan”. -
Page 12: Standby
Menu Operations 2.2 Standby Press power button to switch from TV/RADIO mode to standby mode In standby mode press power button again to switch back to TV/ RADIO mode. The last active channel will be showed. To switch off the STB complete disconnect the power supply on the back side of the STB. 2.3 MUTE Press the [Mute] button to mute the sound. -
Page 13: Play/Pause ►Ii
Menu Operations 2.8 PLAY/PAUSE ►II When you play a recorded program, press [►II] will stop the program, press [►II] again will play the program continually. Also Timeshift is started by this key. The Timeshift function allows you to interrupt a program in progress and continue viewing it at a later time. -
Page 14: Rec
Menu Operations ● 2.12 REC In TV mode, press [●] button you will be asked to start record. 2.13 CH ▲/▼ Press the [CH▲/▼] buttons to change the channel. 2.14 VOL ◄/► Press the [VOL◄►] buttons to adjust the volume. In the menu move the highlight bar. And if you play back a recording and you are in the REW/PLAY/FFW menu and press [VOL◄/►] you will jump 5 min. -
Page 15: Audio
Menu Operations 2.18 Audio In TV mode, press the [Audio] button to open the Audio Track window. Select the item you want to adjust with [CH▲/▼] change value with [VOL◄/►]. 2.19 EPG The STB supports Electronic Program Guides (EPG) to give you information about the actual programs of certain channels like event name, subtitle, description, start and finish time. -
Page 16: Sub
Menu Operations 2.20 SUB In “Subtitle Display” menu press [◄/►] to select “On” or “Off”. Press [◄/►] to select languages. If the current channel has subtitle information, it will be displayed if this function is “On”. If this function is “Off” subtitles won’t be displayed. 2.21 Channel Numbers In TV mode you can enter the channel number directly with your remote control unit and confirm the number with the [OK] button, to change to the desired channel. -
Page 17: Atsc Installation
Menu Operations 3. ATSC Installation In “Antenna Connection” menu; 3.1 ATSC Channel Scan In “ATSC Channel Scan Search” menu; In the “Satellite” item press [OK] to open the “satellite list” to select directly with [CH▲/▼], press [OK] to confirm it. FTA Only: Press [Vol◄/►] to select to scan only free channels or even scrambled channels. -
Page 18: Channel
Menu Operations 3.2 Channel Press [Menu] in the TV/RADIO to enter the main menu. Press [CH / ] to select the channel item. Press [OK] to enter the selected item. Press [CH ] to select the wanted menu item among TV Channel List, Radio Channel List, Channel setup, Favorite group list name and Delete All. -
Page 19: Move
Menu Operations The channels of favorite groups are indicated with a favorite icon behind the name. Press [OK] again to remove the channel from the marked favorite group. Press [Menu] button you will be asked “Are you sure to save?” current. Select “Yes” to save the marked favorite group. - Page 20 Menu Operations 3.2.5 Delete In channel edit menu press red button will open another window where you can choose between delete one channel or delete all channels. ♦ Del One Press red button to mark a channel for deleting. Marked channel will be deleted after you confirm to save the changes when you leave this menu.
-
Page 21: Radio Channel List
Menu Operations 3.3 Radio Channel List Basically the operation of “Radio Channel List” is same as “TV Channel List”, except that in the small channel window the radio Logo will be displayed. 3.4 Delete All To delete all channels: Enter the password. The default password is “0000”. After entering the password correct a safety question will show up where you have to confirm first Select “OK”... -
Page 22: System Setup
Menu Operations 4. System Setup When you open the “System Setup” menu a window like the one beside will be opened. In “System Setup” menu: Press [CH▲/▼] to select menu items among Language, TV System, Time & Timer setting, OSD Setting, Parental Lock, Power setting, TCP/IP Setting and MAC Setting. -
Page 23: Tv System
Menu Operations English, German, French, Italian, Spanish, Portuguese, Russian, Turkish, Polish, Arabic and Farsi. Press [Menu/Exit] to return back from “Language” menu. 4.2 TV System When you enter the “TV System” menu you will see the screen like below: In Display Mode you can switch between Auto, PAL, PAL-M, PAL-N and NTSC. In HD Mode, you can select from Auto / 720P_60 / 1080I_30. -
Page 24: Local Time Setting
Menu Operations with [CH▲/▼] to switch between 0~100. Contrast: Press [OK] to select directly with [CH▲/▼] to switch between 0~100. Saturation: Press [OK] to select directly with [CH▲/▼] to switch between 0~100. Hue: Press [OK] to select directly with [CH▲/▼] to switch between 0~100. Sharpness: Press [OK] to select directly with [CH▲/▼] to switch between 0~10. -
Page 25: Time Setting
Menu Operations Press [Exit] to leave the “Local Time Setting” menu. 4.5 Time Setting In “Time Setting” menu; You can press [CH▲/▼] to switch the timer number. There are totally 8 timers. Timer Mode: Select how often the timer is running: Once, Daily, Weekly, Monthly and Yearly, or switch the timer to off. -
Page 26: Parental Lock
Menu Operations 4.6 Parental Lock In “Parental Lock” menu; You can set a password for anyone who wishes to operate the “Installation” menu. You can also set the password to lock channels. Below you find how to set and change the password. On “Parental Lock”... -
Page 27: Osd Setting
Menu Operations 4.7 OSD Setting In “OSD Setting” menu; OSD Timeout: This setting determines the duration the info window is displayed on the screen when you change channels. Press [Vol◄/►] to set the time between 1 to 10 seconds. OSD Transparency: With this parameter you can set the transparency of the menus. -
Page 28: Other
Menu Operations [Vol◄/►] to select character, press [OK] to confirm it. After modification select “OK” of button bar and press [OK] on the RCU to rename the favorite group name and leave the edit mode. Press [Exit] on the RCU to exit the edit mode without saving the favorite group name. 4.9 Other In “Other”... -
Page 29: Tools
Menu Operations 5. Tools After Tools the Settings menu you can see the window like. In “Tools” menu; Press [CH▲/▼] to select menu items among Information, Factory Setting, S/W Upgrade by OTA. 5.1 Information When you select the “Information” menu you will see a screen like beside. On the right of the screen displays data about the current system. -
Page 30: S/W Upgrade By Ota
Menu Operations A dialogue box will occur where you need to enter the password. After you input the correct password a warning message will be displayed like the one beside. If you select “Yes” then all changes you made will be reset to default values. Make sure you really want to do this! Press [Exit] in both steps will close the window without resetting the receiver. -
Page 31: Rec
Menu Operations 6. Rec In “Rec” menu; Press [CH▲/▼] to select menu items among PVR Storage Information, PVR Setting, Recorded Stream Manager, Remove USB device safely. 6.1 PVR Storage Information Press [Vol◄/►] to select the wanted item partition. When you select the “PVR Storage Information” menu you will see a screen like beside. -
Page 32: Pvr Setting
Menu Operations 6.2 PVR Setting In “PVR Setting” menu; Time shift: Press [Vol◄/►] to switch between ON or OFF. Jump Step Value: Press [Vol◄/►] to switch between “1 mins / 5 Mins / 10 Mins / 30 Mins / 30 sec”. 6.3 Upgrade by USB This function can upgrade the software of your receiver through data sent by usb. -
Page 33: Media List
Menu Operations hard drive. If you want to transfer data (film / photo / music, etc.) with a USB stick start, please note when buying that you buy a USB flash drive with a high read transfer rate and high write transfer rate. These values should be 15-20 MB / sec. -
Page 34: All
Menu Operations 6.4.2 All Press [VOL◄/►] select the all, mp3, image, video, music list, picture list, video list, Record list. You can move the highlighted Record with [CH▲/▼] to preview the highlighted program in the preview window. Press [Menu] or [Exit] buttons to enter TV playing mode. -
Page 35: Remove Usb Device Safely
Menu Operations Delete In channel Record menu, press red button will open another window where you can choose between add one image and add all images. ♦ Del One Press red button to mark an image for add. Marked image will be add after you confirm to save the changes when you leave this menu. -
Page 36: Conditional Access
Menu Operations 7. Conditional Access When you enter to “CAS” menu, you will see a screen like shown here: Tokens Status & About CA In this option, you can find information about the conditional access system. Note: Card must be inserted with chip facing up. -
Page 37: Troubleshooting
Menu Operations 8. Troubleshooting There may be various reasons behind STB problems. Check the STB according to the procedures described below. If you can’t solve your problem even after following the troubleshooting procedures, please contact the dealer. Do not open the STB cover; it may cause a dangerous situation. The front panel doesn’t The power cord is not Check that the power cable... -
Page 38: Technical Specification
Technical Specification Technical Specification SYSTEM ALI_M3603 DDRAM 128MByte Flash 8MByte DECODING Video Decoder MPEG4 compliant support SP@L3 ASP@L5, MPEG2 MP@HL,MPEG1 Decoding Format NTSC/PAL Aspect Ratio 4:3,16:9,AUTO Resolution(CVBS) 720x480(NTSC),720x576(PAL) Resolution(HDMI) 720x480 @ 30fps; 720x576 @ 25fps HD: 480p, 576p, 720i, 720p, 1080i Audio Decoding MPEG Musicam Layer 1 &... - Page 39 Technical Specification A Type, USB2.0 Smart Card Verimatrix POWER SUPPLY Type Switching Mode Input Voltage 100 to 240V,50/60Hz Consumption max. 15W Protection Internal Fuse PHYSICAL SPECIFICATION Size (W x H x D) Net Weight Operation Temp. 0° - 40° C Storage T emp.