Continuous Measurement Of A Moving Target / Scan Mode; Clearing The Last Distance Obtained - Leupold RX-1300i TBR Complete Operating Instructions

CONTINUOUS MEASUREMENT OF A MOVING TARGET / SCAN MODE:

1 . Follow the instructions for "Measuring distance..." as explained previously .
2 . Once the target has been measured, continue to hold down the POWER button
and follow the object as it moves .
3 . The distance will automatically update as long as the POWER button is
continuously depressed .
4 . This procedure can also be used to obtain the range of multiple animals or
objects; simply move the reticle from one target to another while holding
down the POWER button .

CLEARING THE LAST DISTANCE OBTAINED:

The last range reading does not need to be cleared before reading another object's
distance . Simply aim at the new object using the reticle, depress the POWER button
and hold until the new range reading is displayed . The ranging accuracy of all Leupold
RX-1300i TBR Series rangefinders is ± .5 yard/meter at distances less than 125
yards/meters, while the accuracy beyond 125 yards/meters is ± 2 yards/meters . The
maximum range of the unit depends on the reflectivity of the target and atmospheric
conditions .
7