Making Ice With Opal; Draining Opal - FirstBuild Opal Nugget Ice Use And Care Manual

Making ice with Opal

Once Opal has been cleaned, move the ice maker to its desired location and
complete the following steps:
1.
Remove ice bin.
2. Fill reservoir with potable (safe to
drink) water up to the "Max Fill" line.
Water hardness must be less than 12
grains per gallon. Do not fill reservoir
with any liquid except water. Using
any liquid except potable water is
misuse and will void your warranty.
3. Plug the ice maker into a grounded
outlet.
4. Touch the display button to start the
ice maker. The display will flash green
to indicate the ice maker is ON, then
transition to the falling white display.
5. Opal will begin to produce ice in 15-30
minutes. It will continue to make ice
until the bin is full, or it runs out of
water. To continue making ice, just
add more water.

Draining Opal

We recommend draining your Opal when:
1. You put it away, or anytime it's being relocated.
2. You turn it o for more than a few days. (i.e. vacation)
3. Your'e not using much ice. Continuous recirculation of meltwater may a ect taste.
For best results, drain your Opal.
9