Power Button
On/off – a short key press of the power button to turn the headset on and off. As
VOID Wireless is powering off, the ear cup will pulse either green, amber, or red
depending on the battery level.
Pairing – pressing and holding the power button for 10 seconds will put Void
Wireless into Pairing mode.
InfoMic
InfoMic is a new feature for our headsets, it provides a
visual indicator providing mic status, Dolby status,
battery levels, and connectivity status.
LED behavior:
LED 1 – Mic Status
LED off: Mic unmuted
Red:
LED 2 - Battery Level
Amber
pulse:
Red pulse:
Intervals between each pulse and brightness intensity level can be adjusted using CUE.
EQ profiles and Dolby Status
While CUE is running, quickly pressing the dial on CUE Control will change profiles,
InfoMic LED 2 will indicate which profile is active with a series of blinking lights and
beep. The number of blinks and beeps and will equal the profile number.
Profile 1: 1 blink + 1 beep
Profile 2: 2 blinks + 2 beeps
Etc
The color of the blinks on LED 2 during switching of profiles will indicated Dolby status.
Green – Dolby enabled
Red – Dolby disabled
Wireless pairing indicators
LED 2 Red rapid blinking – Wireless headset not synced with dongle
LED 1 and LED 2 blinking red and green – pairing mode. LED 2 will display long
green pulse when pairing is successful.
Mic muted
>20% battery
>10% battery