Summary of Contents for BE WHIRL-A-WAY
- Page 1 14” WHIRL A-WAY operation manual Model # 85.403.014 85.403.014 Manual Curtis Dec 9 2014.indd 1 11/13/2015 8:02:51 AM...
- Page 2 85.403.014 Manual Curtis Dec 9 2014.indd 2 11/13/2015 8:02:51 AM...
- Page 3 table of contents Introduction Using the Operator’s Manual Product Identification Record Identification Numbers Pre-Operating Instructions Before You Begin Intended Use Care Operating Operating Recommended Applications Use with a Gun and Lance Attach to Long Wand Parts List Parts List Warranty Warranty 85.403.014 Manual Curtis Dec 9 2014.indd 3 11/13/2015 8:02:51 AM...
- Page 4 Whirl-A-Way. Using the Operator’s manual The operating manual is an important part of your 14” Whirl-A-Way and should be read thoroughly before initial use, and referred to often to make sure adequate safety and service concerns are being addressed.
-
Page 5: Product Identification
Record Identification Numbers 14” Whirl-A-Way If you need to contact an Authorized Dealer or Customer Service line (1-866-850-6662) for information on servicing, always provide the product model and identification numbers. You will need to locate the model and serial number for the pump and record the information in the places provided below. - Page 6 The surface Cleaning System you have purchased connects directly to a 1/4” quick connect coupler, operating to a maximum of 4000 PSI. This 14” Whirl-A-Way is designed to operate with cold water pressure washers. We do not recommend the use of hot water as the nylon brush skirt will soften and wear prematurely, voiding any warranty.
- Page 7 Recommended Applications use with a gun and lance Connect to lance using q/c fittings on the lance and 14” Whirl-A-Way. Attach to long wand Attach to a longwand for cleaning hard to reach surfaces. Connect to longwand using the QC fittings on the longwand and 14”...
-
Page 8: Parts List
parts list Parts List A. 85.792.037 - brush skirt B. 85.790.037 rotary head C. 85.791.037 - rotary arm 85.403.014 Manual Curtis Dec 9 2014.indd 8 11/13/2015 8:02:53 AM... -
Page 9: Warranty
warranty Warranty The rotary head has a six-month warranty from the date of purchase. Should you encounter problems with the rotary head within that time period, contact the place of purchase for RGA and return with authorized RGA. There is no warranty on the nylon brush ring. All other components of the surface cleaning system have a 30-day replacement warranty against manufacturer’s defects only. - Page 10 If you need assistance with the assembly or operation of this Whirl-A-Way please call 1-866-850-6662 85.403.014 Manual Curtis Dec 9 2014.indd 10 11/13/2015 8:02:53 AM...
- Page 11 85.403.014 Manual Curtis Dec 9 2014.indd 11 11/13/2015 8:02:53 AM...
- Page 12 85.403.014 Manual Curtis Dec 9 2014.indd 12 11/13/2015 8:02:54 AM...
- Page 13 85.403.014 Manual Curtis Dec 9 2014.indd 13 11/13/2015 8:02:55 AM...
- Page 14 For 4GPM, use #020 nozzle 85.403.014 Manual Curtis Dec 9 2014.indd 14 11/13/2015 8:02:55 AM...
- Page 15 85.403.014 Manual Curtis Dec 9 2014.indd 15 11/13/2015 8:02:55 AM...
- Page 16 85.403.014 Manual Curtis Dec 9 2014.indd 16 11/13/2015 8:02:55 AM...
- Page 17 85.403.014 Manual Curtis Dec 9 2014.indd 17 11/13/2015 8:02:55 AM...
- Page 18 85.403.014 Manual Curtis Dec 9 2014.indd 18 11/13/2015 8:02:55 AM...
- Page 19 85.403.014 Manual Curtis Dec 9 2014.indd 19 11/13/2015 8:02:55 AM...
- Page 20 85.403.014 Manual Curtis Dec 9 2014.indd 20 11/13/2015 8:02:57 AM...