Positioning The Seat; Adjusting The Motion-Control Levers - Toro TimeCutter SS 5000 Operator's Manual

Positioning the Seat

The seat can move forward and backward. Position the seat
where you have the best control of the machine and are most
comfortable (Figure 11).
Figure 11
Adjusting the Motion-Control
Levers
Adjusting the Height
You can adjust the motion-control levers higher or lower for
maximum comfort
A
g027252
Adjusting the Tilt
g188217
You can adjust the motion-control levers forward or rearward
for your comfort.
1. Loosen the upper bolt holding the control lever to the
control-arm shaft.
2. Loosen the lower bolt just enough to pivot the control
lever forward or rearward
3. Tighten both bolts to secure the control lever in the
new position.
4. Repeat the adjustment for the other control lever.
16
(Figure 12).
B
Figure 12
(Figure 12).
g027252