Miele DA 7000 D Operating And Installation Instructions page 15

One or more of sensors 1 to 4 will flash.
The number of flashing sensors
indicates the percentage of the
operating time which has already been
used up.
Sensor 1
Sensors 1 and 2 = 50 %
Sensors 1 to 3
Sensors 1 to 4
^ When you take your finger off the
Grease filter sensor l, the current
fan setting will show.
The number of operating hours used
remains in the memory, even when the
appliance is switched off or there is a
power cut.
= 25 %
= 75 %
= 100 %
Charcoal filter operating hours
counter
On delivery, the operating hours counter
for the charcoal filter is deactivated.
For recirculation mode, the operating
hours counter needs to be set to suit
the type of cooking you do.
The Charcoal filter sensor | will light
up after the cooker hood has operated
for the number of hours set.
^ The charcoal filters must be replaced
with new ones.
Afterwards, the operating hours counter
will need to be reset (see "Cleaning and
care").
Activating and altering the charcoal
filter operating hours counter
^ Touch the On/Off sensor s to switch
the fan off.
^ Touch the Run-on sensor m and the
Charcoal filter sensor | at the same
time.
The Charcoal filter sensor | and one of
the fan power level sensors 1 to 4 will
flash.
Sensors 1 to 4 indicate the time set:
Sensor 1 = 120 hours
Sensor 2 = 180 hours
Sensor 3 = 240 hours
Sensor 4 = Deactivated
^ Touch the 1 sensor to select a shorter
time and the 4 sensor to select a
longer time, until the time required
has been set.
Operation
15