Step - ADT Garda Response PM30 Reference Manual

Panic Alarm
The Panic Alarm allows you to send an alert to the ADT Alarm Monitoring Centre if
you feel threatened or vulnerable in your home.

Step 1:

Activate the Panic Alarm using the Alarm Panel by pressing and holding
keys simultaneously for 2 seconds.
Step 2:
The Internal Siren is activated and now sounds (unless a silent mode has been
requested at the point of installation).
Step 3:
The System sends an alert signal to the ADT Alarm Monitoring Centre, our monitoring
specialists act fast to respond to your emergency and if necessary contact the
Gardai.*
(*ADT can only contact the Gardai if your Panic Alarm has been issued with a Unique Reference Number –
URN.
Adding KeyTags
Step 1
On the Main Panel press
screen saver
Step 2
Press
Step 3
The display will show: 'User Settings'
Step 4
Press OK
Step 5
Type in your master code
Step 6
The display will show: 'Set Zone Bypass'
Step 7
Press until you find 'Proximity Tags',
Step 8
OK
Press
Step 9
The display will show: 'Add New Tag'
Step 10
Press OK
Open Padlock and enter your master code to exit
4
and