Scanning; How Can I Turn Down The Beeping Noise (Volume) When I Scan A Part; How Can I Turn Up The Beeping Noise (Volume) When I Scan A Part - AUTOPOWER MC9090-G User Manual

WMS BARCODE USER GUIDE
S
CANNING
To scan a barcode point the scan window at the label and press the trigger on the RF Scan Gun.
The scan window must have a clear view of the barcode for it to be read successfully. Hold the
RF scanner so that the red scan beam crosses the entire barcode horizontally. The Scan LED light
changes from red to green when the RF scanner beeps, indicating a successful read. To ensure
optimum scanning ability, avoid touching the scan window and keep barcode labels free from
smudges and stray marks.

How can I turn down the beeping noise (volume) when I scan a part?

Hold the blue button and press the letter "M" on the scan gun. This will turn down the volume
of the beeping on the scan gun.

How can I turn up the beeping noise (volume) when I scan a part?

Hold the blue button and press the letter "H" on the scan gun. This will turn up the volume of
the beeping on the scan gun.
How can I Enable or Disable the character key repeat on the RF Gun Keyboard for
model Motorola Mc9190 RF Gun?
•
From the Bar Code Menu on the RF Gun, type in the letter "T" to drop to TCL
•
An Options Button is shown on the top left corner of the screen
•
Tap the Options button> My Device Icon> Control Panel Icon > Keyboard Icon
•
The Keyboard Icon will display a window with the Repeat Tab
•
Tap the Repeat tab > Tap the checkbox to Enable or Disable the Character Repeat
Autopower Corporation Copyright 2017
9 | P a g e