Subscribe to Our Youtube Channel
Related Manuals for AbleNet PowerLink 4
Summary of Contents for AbleNet PowerLink 4
- Page 1 PowerLink 4 control unit User Manual Read this entire Manual before operating this device.
- Page 2 SAVE THESE INSTRUCTIONS Indications for Use The PowerLink 4 is intended to provide switch access to/control of electrical appliances with basic on-off functionality. This product allows any one or two switches to turn an electrical appliance on or off for various durations.
- Page 3 Table of Contents Product Map/Features Using the PowerLink 4 Basic Setup and Use Linking with AbleNet Wireless Devices Modes of Control Direct Latched Timed 2-Switch Count Troubleshooting Maintenance Care Cleaning Storage Technical Specifications Regulatory Warranty/Repair/Return...
- Page 4 Minutes or Timed Seconds Modes (see page 6). Product Features • Two grounded AC power inlets with flexible cords for customized positioning. • AbleNet wireless compatibility with Jelly Beamer® and other AbleNet wireless devices. • Two switch input jacks (1/8 in/3.5 mm mono plug) •...
- Page 5 Linking with AbleNet Wireless Devices The PowerLink can be controlled by any AbleNet Wireless* transmitter such as the Jelly Beamer® wireless switch. Linked devices can access the PowerLink from up to 30 feet away without pointing or “line of sight”.
- Page 6 Modes of Control The PowerLink control unit offers six modes of appliance control: Direct, Count, Two-Switch, Timed Seconds, Timed Minutes, and Latch. Press the “Mode” button repeatedly to cycle through the modes of control. Some modes use the Display Counter to convey information. These modes, and the display’s func- tion are identified with this symbol: Direct The Direct mode keeps the appliance(s) on only while the switch is activated.
-
Page 7: Troubleshooting
Troubleshooting If the equipment fails to operate after you have read the instructions, follow the suggestions listed below. If the problem persists, Do not attempt to dismantle this product. There are no serviceable parts. Is PowerLink receiving power? Does the wall outlet work with other devices? Check to be sure the PowerLink is plugged into the wall outlet. -
Page 8: Technical Specifications
Maintenance Care & Cleaning Routinely check PowerLink before each use to confirm solid connection to AC power source. Do not use PowerLink if any cord appears to be damaged. If the device becomes wet or does not work properly, unplug the device immediately and do not attempt to use. •...
Need help?
Do you have a question about the PowerLink 4 and is the answer not in the manual?
Questions and answers