Optoma EX536 User Manual page 53

Curved correction
Select this function to correct the projected images
with linearity uneven or vertical and horizontal bending
deformation.
Press button to adjust options.
Item
Curved correction
X/Y gain
Curved correction
X compensation
Curved correction
Y compensation
Note:
After adjusting values about H/V Keystone , if users adjust Conner correction and Curved
correction, values about H/V Keystone will be reset . And after adjusting values about
Conner correction and Curved correction, if users adjust about H/V Keystone, values about
Conner correction and Curved correction will be reset also.
Curved correction X compensation and Curved correction Y compensation can not be adjust-
ed individually. Adjust Curved correction X compensation and Curved correction Y compensa-
tion after adjusting the X/Y Curved correction.
Press KEYSTONE button on the remote control,then the Keystone OSD menu appears
(includes: H / V keystone , Conner correction, Curved correction and Reset value), and press
Maximum Keystone range up to ±15° vertically and ±15° horizontally.However, the image
minimal correction value.
The screen size will be changed with various H/V Keystone adjustments .
Keystone may influence image aspect .
Reset value
Select this function to make adjustment value back to
the factory default .
1) Press button to select [Reset value] option.
2) Press <OK> button.
Release Keystone mode.
Operation
Press Adjust right width
Press Adjust left width
Press Adjust top width
Press Adjust bottom width
Adjust distortion on the
Press
Adjust distortion on the
Press
Adjust distortion on the
Press
Adjust distortion on the
Press
53
Adjustment
right
left
top
bottom
Install the projector with the
Expand