Download Print this page

FEA OPTI-FET User Manual

Compressor pedal

Advertisement

Quick Links

Battery replacement:

FEA
Remove the four screws on the bottom cover to access the battery
compartment. If storing the unit for long periods of time the battery
OPTI-FET
should be removed to prevent corrosion of the battery snap. Be sure
to place the battery wires along the side of the battery in the battery
COMPRESSOR
pocket and use care while replacing the bottom cover.
Warranty:
The FEA OPTI-FET Compressor is fully covered for a period of 5
(five) years and the foot switches are covered for 1 (one) year against
defects in material and workmanship. Abuse and neglect are not
covered under the warranty. Any modifications or repairs not
authorized by FEA voids all warranties. The customer will be
responsible for shipping cost to and from FEA Labs for repairs.
Contact me before attempting to ship a unit for repair at:
info@fealabs.com.
All repairs made outside of the warranty period will be very
reasonable (usually only the cost of the parts)... your satisfaction is
priority one.
Contact FEA Labs at:
www.fealabs.com
info@fealabs.com
REV 3.4
www.fealabs.com

Advertisement

loading
Need help?

Need help?

Do you have a question about the OPTI-FET and is the answer not in the manual?

Questions and answers

Summary of Contents for FEA OPTI-FET

  • Page 1: Battery Replacement

    Warranty: The FEA OPTI-FET Compressor is fully covered for a period of 5 (five) years and the foot switches are covered for 1 (one) year against defects in material and workmanship. Abuse and neglect are not covered under the warranty.
  • Page 2: Technical Specifications

    2mS to 150mS studio quality features that many musicians enjoy.  RELEASE: 50mS to 1S The new audio path has been redesigned with the FEA 3S output amplifier circuit for warm tone and excellent noise rejection that  RATIO: 1.5:1 to 20:1 features a “class A”...
  • Page 3 I would have to agree with them. The dual rail power supply in the OPTI-FET Compressor is built on its own discrete circuit board to physically separate it from the audio circuits.
  • Page 4 This also reduces the to ground via the sleeve of the plug inserted into the INPUT possibility of “pumping” with very low frequencies. jack. The “switch on” sensing method used in the FEA OPTI-FET Compressor keeps nearly all of the circuit’s ...