Solar Solve Marine Solasafe Installation Instructions Manual

Doc: ELE16PH33A
Solar Solve Marine
Installation Instructions Installation Instructions Installation Instructions Installation Instructions
ELECTRIC SCREENS and BLINDS ELECTRIC SCREENS and BLINDS ELECTRIC SCREENS and BLINDS ELECTRIC SCREENS and BLINDS
SOLASAFE SOLASAFE SOLASAFE SOLASAFE
SOLAROLA SOLAROLA SOLAROLA SOLAROLA
ONLY A FULLY QUALIFIED ELECTRICIAN SHOULD INSTALL MOTORISED
SCREENS / BLINDS FOR HEALTH & SAFETY REASONS AND TO
Care and Maintenance
Under normal circumstances dusting with a NON-ABRASIVE dry duster is all that is required. Finger
prints, grease and most stubborn marks on film, blackout, lyverscreen and fibreglass fabrics can be
carefully removed with white spirit and a soft cloth, followed by a further wiping over with a soft non-
abrasive cloth dipped in clean soapy water. If any type of film or fabric becomes very dirty it can be
carefully wiped over with a soft non-abrasive cloth and clean water with a little soap or detergent. This
will do no harm as long as the film / fabric is allowed to dry completely before being rolled up. Excess
water should be removed as it will leave a water mark when dry.
We reserve the right to make any modifications necessary to ensure products comply with customer requirements.
The drawings in these documents are for illustrative purposes and NOT TO SCALE.
PLEASE NOTE:
IF WINDOWS ARE SLOPING IT
WILL BE NECESSARY TO USE THE
CABLE SUPPORT SYSTEM
CASSETTE and CASSETTE and
CASSETTE and CASSETTE and
NON- - - - CAS NON NON NON CASS S S S ETTE CAS CAS
® ® ® ®
® ® ® ®
MAINTAIN A FULLY VALID WARRANTY
for for
for for
ETTE ETTE ETTE
CASSLITE CASSLITE CASSLITE CASSLITE
DIMMLITE DIMMLITE DIMMLITE DIMMLITE
IMPORTANT NOTE FOR INSTALLER:
PLEASE LEAVE THIS INSTRUCTION
SHEET WITH THE ROLLER SCREEN /
BLIND FOR CUSTOMERS REFERENCE
Page 1
® ® ® ®
® ® ® ®