Ozito 15W Original Instructions Manual

Ozito 15W Original Instructions Manual

Electric engraver

Advertisement

Quick Links

WARRANTY

All of our products undergo strict quality checks to ensure that they reach you in perfect condition.
In the unlikely event that your device develops a fault, please contact our service department at the
address shown on this guarantee card. You can also contact us by telephone using the customer
service number shown. Please note the following terms under which guarantee claims can be
made:
1. These warranty terms regulate additional warranty services, which the manufacturer mentioned
below promises to buyers of its new products in addition to their statutory guarantee claims are not
affected by this guarantee. Our guarantee is free of charge to you.
2. The warranty services only covers defects due to material or manufacturing faults on a product
which you have bought from the manufacturer mentioned below are limited to either the rectification
of said defects on the product or the replacement of the product, whichever we prefer.
Please note that our devices are not designed for use in commercial, trade or professional
applications. A guarantee contract will not be created if the device has been used by commercial,
trade or industrial business or has been exposed to similar stresses during the guarantee period.
3. The following are not covered by our guarantee:
- Damage to the device caused by a failure to follow the assembly instructions or due to incorrect
installation, a failure to follow the operating instructions (for example connecting it to an incorrect
mains voltage or current type) or a failure to follow the maintenance and safety instructions or by
exposing the device to abnormal environmental conditions or by lack of care and maintenance.
- Damage to the device caused by abuse or incorrect use (for example overloading the device or
the use or unapproved tools or accessories), ingress of foreign bodies into the device (such as
sand, stones or dust, transport damage), the use of force or damage caused by external forces (for
example by dropping it).
- Damage to the device or parts of the device caused by normal or natural wear or tear or by normal
use of the device.
4. Your Product is guaranteed for a period of 36 months from the original date of purchase and
is intended for DIY (Do It Yourself) use only. Lithium Ion batteries and chargers are covered by a
12 month warranty. Warranty excludes consumable parts. Guarantee claims should be submitted
before the end of the guarantee period within two weeks of the defect being noticed. No guarantee
claims will be accepted after the end of the guarantee period. The original guarantee period
remains applicable to the device even if repairs are carried out or parts are replaced. In such cases,
the work performed or parts fitted will not result in an extension of the guarantee period, and no
new guarantee will become active for the work performed or parts fitted. This also applies if an
on-site service is used.
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST RETURN THE PRODUCT TO
THE PLACE OF PURCHASE WITH YOUR REGISTER RECEIPT.
Please refer to the restrictions of this warranty concerning wearing parts, consumables and missing
parts as set out in the service information in these operating instructions.
CUSTOMER SERVICE HELPLINE
GB: 0151 294 4488
IRL: 1850 882711
Ozito-diy.co.uk
OZITO UK
Unit 9 Stadium Court, Wirral International Business Park, Plantation Road, Bromborough,
Wirral, CH62 3QG
ELECTRIC ENGRAVER
15W
ORIGINAL INSTRUCTIONS

SPECIFICATIONS

Voltage:
Power:
No Load Speed:
Accessory Diameter:
WHAT'S IN THE BOX
Electric Engraver
Stencil x 2 and Hex Key
0816
230-240V ~ 50Hz
15W (S2: 30min)
6,000/min
3mm
ozito-diy.co.uk
EGR-2050U

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 15W and is the answer not in the manual?

Questions and answers

Summary of Contents for Ozito 15W

  • Page 1: Specifications

    Voltage: 230-240V ~ 50Hz 3. The following are not covered by our guarantee: Power: 15W (S2: 30min) - Damage to the device caused by a failure to follow the assembly instructions or due to incorrect No Load Speed: 6,000/min installation, a failure to follow the operating instructions (for example connecting it to an incorrect...
  • Page 2 SETUP & PREPARATION KNOW YOUR PRODUCT ELECTRIC ENGRAVER 1. FITTING ENGRAVING TIP 1 Engraving Tip 3 Stroke Adjustment Dial Caution: Ensure the tool is disconnected from the power supply 2 Tip Release Screw 4 On/off Switch before performing any of the following operations. 1.
  • Page 3 OPERATION 2. Set stroke adju desired setting 2. ON/OFF SWITCH 3. STROKE ADJUSTMENT DIAL The tool is recommended for use with a residual current device The stroke adjustment controls the stroke length and in turn the with a rated residual current of 30mA or less. engraving depth.
  • Page 4 ustment dial to 4. ENGRAVING 5. ENGRAVING CONT. WARNING! Always wear safety glasses when using this tool. 1. Connect the engraver to mains power and ensure the work piece 4. Turn the engraver on. 5. Use a light pressure while is properly secured.
  • Page 5 Save these instructions and other documents supplied with this tool for future reference. Note: Ozito Industries will not be responsible for any damage or injuries caused Before you connect the equipment to the mains supply make sure that the data on the rating plate are identical to the mains data.
  • Page 6 GENERAL POWER TOOL SAFETY WARNINGS WARNING! source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the Read all safety warnings and all instructions. Failure to follow the warnings and switch or energising power tools that have the switch on invites accidents. instructions may result in electric shock, fire and/or serious injury.
  • Page 7 Additonal operating & safety instructions Electric Engraver the following product Please note that the following parts of this product are subject to normal or natural wear and that the following parts are therefore also required for use as consumables. Electric Engraver EGR-2050U (Ozito) Category Example 2014/29/EU...
  • Page 8 Items supplied Technical data Caution! Please check that the article is complete as Input: ........230-240 V~ 50 Hz Residual risks specified in the scope of delivery. If parts are Even if you use this electric power tool Motor: ........15 W (S2 : 30 min) missing, please contact our service center or the in accordance with instructions, certain No load speed: ........6,000/min...

Table of Contents