BODYGUARDZ PURE Installation Instructions Manual

BODYGUARDZ PURE®/PURE 2/SPYGLASS® WITH EXPRESS ALIGN ®
INSTA LLAT I O N IN ST RUC T I O N S
EXPRESS ALIGN
INSTALL
1
2
3
4
B R E A KD OWN :
1 RELEASE LINER
A clear film that protects the adhesive side of the protector.
2 GLASS PROTECTOR
The thin, ultra-strong glass that will protect your device.
3 CAP SHEET
A clear film that protects the anti-smudge coating on the glass.
4 EXPRESS ALIGN TRAY
This plastic tray precisely aligns the glass to your device.
O PE N TO G ET START ED
1
BEFORE While holding the
tray, peel o the
YOU BEGIN
release liner to
expose the adhesive,
Remove case from
then place the tray
your phone (if any)
on top of your device.
Place phone on a flat
surface, screen-up
Clean your phone's
2
screen thoroughly
Through the opening in
Watch our install video:
bodyguardz.com/install
the tray, firmly press
and hold the glass
protector down with
PRO TIPS
your fingers, while
pulling the tray o with
D U ST R E M OVA L
your other hand.
A F T E R I NSTA L L AT I O N:
Use the provided dust
removal stickers to pull out
3
any trapped dust. Carefully
lift up the corner of the
glass closest to the dust Use the included
particle and place the sticky
cleaning cloth to
side of the strip against the
push out any bubbles,
piece of dust. Then, pull dust
then peel o the
sticker straight out.
cap sheet.
TO REMOVE PROTECTOR:
Carefully lift one corner and
slowly pull the glass o
your device.
bodyguardz.com
Check orientation
of phone and protector
Tray will come off and
protector will adhere to phone
Extra bubbles will
disappear within 24-48 hrs.
Nice Work!
Installation is complete.