Body heat quickly heats up the sleeping area (3). Heated air ab- sorbs moisture. The damp air in the sleeping area flows outwards over All-In-One sleep shell + bivouac module the manually adjustable ventilation opening (4). This system ensures warm and dry sleeping conditions in...
Packing Packing Before packing ◊ Clean all of the equipment. ◊ Close all of the zippers. ◊ When camping on sandy and dirty sites: clean all zippers with a brush. ◊ Dry any damp or wet components before packing. Outer shell Open the zipper on the outer shell.
Packing Sleeping pad Open the valve and let all the air out. Fold the sleeping pad in three lengthways and roll it up towards the valve. The rest of the air will be expelled. Store the rolled-up sleeping pad in the pack sack. Liner Stuff the liner into the pack sack, feet first.
Details and Handling Details and Handling Tent module Outer tent entrance Open the zipper. Roll up the entrance. Fix the entrance. Manual entrance fastener...
Page 16
Details and Handling Inner tent entrance Open the zipper. Roll up the entrance. Fix the entrance. Awning feature...
Page 17
Details and Handling Ventilation 2 ventilation hoods on the outer tent 1 ventilation window on the inner tent Pockets 3 storage pockets in the inner tent...
Details and Handling Loops 6 hanging loops in the inner tent Bivouac module Bivouac entrance Open both flap zippers. Open the U-shaped zipper. Roll up the entrance. Fix the entrance.
Pack dimensions and weight All-In-One sleep shell All-In-One bivouac In unfavourable weather conditions, the bivouac module can be packed up while still attached to the sleep shell. Remove the liner and the deflated sleeping pad before- hand. Stuff the outer shell into the compression bag as normal, before putting the still attached and folded bivouac module into the compression bag.
Pack dimensions and weight CARE LABEL CARE LABEL Outer shell / Bivouac module / Tent module / Sleeping pad ◊ DO NOT WASH ◊ DO NOT BLEACH ◊ DO NOT TUMBLE DRY ◊ DO NOT IRON ◊ DO NOT DRY CLEAN ◊...
Pack dimensions and weight REPAIRS All components After every use, leave all components to fully dry before packing them. Ideally, set- up outer shell, bivouac and tent module for drying with mounted poles. In order to increase its water repellency, the exterior fabric can be treated with a water-proofing impregnation as required (e.g., Nikwax Tent).
Pack dimensions and weight REPAIRS Repair and care kits using repair and care kits repair kit fabrics seam sea- seam repair kit zipper repair kit ler Silicon- sealer sleeping care poles Textile PU-Textile SEAM GRIP GORE-TEX SILNET - SEAM Instant ZIP CARE POLE-REP - 7g Fabric Repair...
Pack dimensions and weight STORAGE / SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS General ◊ The Polarmond sleep system has to be selected according to the body height of the user: 160 – 170 cm body height: SHORT 171 – 185 cm body height: REGULAR 186 –...
Pack dimensions and weight SAFETY INSTRUCTIONS ◊ Keep the pad away from your pets. Dogs love to chew on valves and cats like to sharpen their claws on the pad. Liner The liner’s fabric is not flame retardant! Avoid any contact with open fires or heat sources.
Need help?
Do you have a question about the All-in-one sleep shell and is the answer not in the manual?
Questions and answers