Do you have a question about the Breeze Easy and is the answer not in the manual?
Questions and answers
ROY GAAL
June 11, 2025
how do I turn off the auto fan and light
Subscribe to Our Youtube Channel
Summary of Contents for DewStop Breeze Easy
Page 1
DewStop ® breeze easy model # F200-1W Installation Guide Read and Save These Instructions Need Help? Service@DewStop.com 1-360-876-2974 (English) or 1-800-615-5439 (French) LISTED...
Please Read and Save These Instructions Table of Contents page 1 ....Table of Contents / Specifications page 2 ....What’s Inside The Box page 3 ....Safety Information page 4 ....Planning Your Installation page 5 ....Connecting The Duct page 6 ....
What’s Inside The Box GRILLE HOUSING MOTOR Qty:1 Qty:1 Qty:1 DewStop ® breeze easy model # F200-1W Installation Guide Read and Save These Instructions Need Help? Service@DewStop.com 1-360-876-2974 (English) or 1-800-615-5439 (French) LISTED DAMPER CONTROL TEMPLATE MANUAL Qty:1 Qty:1 Qty:1...
WARNING: To reduce the risk of electric shock, please disconnect the electrical supply circuit before servicing. CAUTION: This product must be properly grounded. Go to DewStop.com to obtain a copy of this manual.
Planning Your Installation When installing the ventilation fan in a new construction site, install the main body of the fan and duct work during the rough-in construction of the building. The GRILLE should be installed after the finished ceiling is in place. When installing in existing construction, use the provided cutout TEMPLATE for the ceiling.
Connecting the Duct ● Install a circular duct to outlet and secure it with duct tape or clamps. ● Install the duct (G) to the outlet with a gradient 1°~2° to the outside as shown. ● The ducting from this fan to the outside of the building has a strong effect on the ●...
Removing Your Old Fan 1.) Disconnect the electrical power supply and lock out the service panel for the existing fan. 2.) Remove the grille from the existing fan. Pull the grille down to expose its two springs. Squeeze each spring together and pull down again to release the springs from the motor plate slots.
Removing Your Old Switch 1.) Disconnect the electrical power supply and lock out the service panel for the existing fan. 2.) You can install the CONTROL in any standard switch location, multi-gang or single gang. 3.) Unscrew the face plate and your old switch. unscrew unscrew unscrew...
Roomside Fan Installation WARNING: Disconnect all AC Power Breakers or Fuses before attempting to cut into your ceiling. 1.) Place provided sheetrock cutout TEMPLATE on ceiling where you wish the fan to be (DAMPER and electrical positions shown on TEMPLATE). Mark around the edge of the TEMPLATE.
Page 10
WARNING: Disconnect the AC power before any work is done to any part of the circuit Breeze Easy is connected to. If you do not understand this warning, seek the services of a qualified licensed electrician. WARNING: Copper to copper only. Do not use aluminum wire.
Page 11
reach hand in through the hole in the HOUSING to access DAMPER DAMPER flex ducting SUPPORT STRIPS HOUSING ceiling conduit Reattaching DAMPER: Align notch to upper tab, match screw holes. DAMPER flex ducting SUPPORT STRIPS conduit ceiling ROUNDHEAD WOOD SCREWS Qty:4 7.) To reinstall the fan MOTOR, secure in place using the 3 MOTOR screws you removed in step #3.
Above the Ceiling WARNING: Disconnect the AC power before any work is done to any part of the circuit Breeze Easy is connected to. If you do not understand this warning, seek the services of a qualified licensed electrician. WARNING: Copper to copper only. Do not use aluminum wire.
Page 13
3.) Place fan over ceiling opening, then attach wiring from HOUSING to power from CONTROL through conduit. HOUSING DAMPER conduit ceiling 4.) Attach DAMPER to 10.2 cm (4 in) ducting. Use a length of flex ducting, 61 cm (2 ft) maximum. HOUSING DAMPER flex ducting...
6.) From roomside, a ttach the GRILLE by squeezing the mounting springs together and inserting the springs into the slots in the MOTOR. ceiling mounting springs GRILLE Care and Cleaning WARNING: To reduce the risk of electric shock, fire, or injury to persons, disconnect or turn off the breaker and lock the power supply at the panel to prevent the power from being turned on before servicing or cleaning the unit.
Installing The Control WARNING: Turn off circuit breaker or remove fuse(s) and test that power is off before wiring. Wiring the control live can cause serious risk of electrical shock and/or damage the control, voiding the warranty. For safety, this product must be installed in a grounded wall enclosure.
Page 16
CONTROL WIRE Qty:4 DewStop FS-300 ® www.DewStop.com GTR Technologies, Inc. U.S.A. & International Patent Pending Brevet américain et international en instance Electrical Input: 120 volts @ 60Hz Entrée électrique : 120 volts @ 60 Hz...
Using The Control BLUE LED LIGHT: Lets you know when your fan is on (especially useful for fans with low sound levels). CONDENSATION SENSOR: Senses condensation SENSITIVITY (humidity) in the room and turns your fan on and off automatically. TIMER AND SENSOR SETTINGS: Countdown timer TIMER / MINUTERIE SENSIBILITÉ...
Manual On/Off: Press the FAN ON/OFF button once to manually turn fan on, and again to turn fan off. Countdown Timer: When the fan is turned on manually, the countdown timer will run your fan for your selected period of time, then turn your fan off.
Air Drafts In Wall Enclosure Older homes may experience air flowing (drafts) from the inside wall cavity into or out of the wall enclosure depending on the draft situation. If this CONTROL is experiencing problems sensing condensation, sealing any enclosure openings is needed.
Page 20
Q: Why do the windows and mirrors fog even when the fan is running? A: If windows and mirrors are very cold, condensation can still form on those surfaces. If the bathroom is sealed tightly, replacement air may not be entering the room fast enough to displace moist air.
Page 21
Q: I really like the CONTROL, can I order a second one separately? A: Yes! Visit our website at www.dewstop.com to purchase more DewStop Humidity and Condensation Sensing Fan Controls!
GTR Technologies Inc. www.DewStop.com Need Help? Service@DewStop.com 1-360-876-2974 (English) or 1-800-615-5439 (French) DewStop Breeze Easy is a product of GTR Technologies Inc. All rights reserved. USA Patent No. US 9,360,228 B2. Other USA and international patents pending. 1710...
Need help?
Do you have a question about the Breeze Easy and is the answer not in the manual?
Questions and answers
how do I turn off the auto fan and light