Table of Contents
Advertisement
Quick Links
USE, INSTALLATION AND MAINTENANCE
INSTRUCTIONS FOR ELECTRICAL
Dear User,
we are sincerely grateful to you for purchasing one of our products.
We are sure that the appliance modern, functional and easy to use, built with the finest materials
and components will satisfy all your needs.
We would ask that you read the instructions within this booklet very carefully so as to enable you
to obtain quality results from the outsets.
The appliance must be installed only by a qualified electrician in compliance with the
instructions provided. The manufacturer declines all responsability for improper installation.
MODELS: TRV602 NF
The manufacturer is not responsible for any transcription errors or misprints contained in this handbook
and, furthermore, reserves the right to make any modification on the products, which might be deemed
necessary or usefull, this being in the user's interest, without altering their basic operating or safety
features. This cook top was designed to be used exclusively as a cooking appliance: any other use
(such as heating rooms) is to be considered improper and dangerous.
BUILT-IN HOT PLATES
COD. 04074EUR - 21.06.2012
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Eurotech TRV602 NF
Summary of Contents for Eurotech TRV602 NF
- Page 1 The appliance must be installed only by a qualified electrician in compliance with the instructions provided. The manufacturer declines all responsability for improper installation. MODELS: TRV602 NF The manufacturer is not responsible for any transcription errors or misprints contained in this handbook and, furthermore, reserves the right to make any modification on the products, which might be deemed necessary or usefull, this being in the user’s interest, without altering their basic operating or safety...
- Page 2 DESCRIPTION TYPE: PCZ VTC 30 1 Radiant electric heating element Hi-light Ø 140 mm of 1200 W 2 Radiant electric heating element concentric Hi-light Ø 180/120 mm of 1700/700 W 3 Knob for electric element 1 4 Knob for electric element 2...
- Page 3 1) ELECTRIC HOB Connection of electric heating elements Heating elements are controlled by energy The hot plates are equipped with radiant heating regulators with 12 positions that permit to obtain a elements with different powers and diameters. big range of different temperatures. Cooking zones are aesily identifiables thanks to the In Scheme 1, by way of information, we give circles (see illustration in description) on the top;...
- Page 4 SCHEME 1 Position for regulation Power and dimensions Possible cooking of the cooking zones of the knobs processes Zone Heating Power Diameter no° element in mm Hi-light 1200 To dissolve butter, chocolate, 180/120 Hi-light 1700/700 1 - 4 etc... To heat small amounts of liquid.
- Page 5 WARNINGS: - Cooking zones after using remain warm; don’t for a correct use, please look at fig. 2 and remind: leave objects, don’t lean your hands so to avoid - switch on the electricity only after having placed burns, till the indicator light is off. the pot on the cooking zone.
- Page 6 WARNING FOR USE: ► the appliance is built to perform the following function: cooking and heating food. Every other use must be considered improper: ► never use this appliance to heat the environment; ► do not attempt to change the technical characteristics of the product because it can be dangerous.
-
Page 7: Electric Hob
CLEANING Before any cleaning operation, disconnect the - Marks of liquid, overflowed from the pot, can be appliance from the electric circuit. removed using vinegar or lemon. - Pay attention to not let fall sugar or element with 2) ELECTRIC HOB sugar. -
Page 8: Installation
INSTALLATION 3) INSERTING TECHNICAL INSTRUCTIONS FOR THE INSTALLER After having cleared out all the packing components, Installation, transformations and maintenances make sure of the integrity of the appliance. below listed, may only be carried out by a If you are in any doubt, do not use the appliance competent technician. - Page 9 INSTALLATION 4) FIXING - In order to avoid accidental contact with the surface of the box of the overheated hob during A special sealing strip underneath the hob for use, it is necessary to install a wooden divider at a damage.
-
Page 10: Electrical Connection
INSTALLATION 5) ELECTRICAL CONNECTION - Please do not use in the connection any reduction, adaptation that may provoke a false contact with following dangerous overheatings. IMPORTANT: the appliance must be installed - The outlet must be accessible after the built-in. following the manufacturer's instructions. - Page 11 INSTALLATION PCZ VTC 30 FIG. 9 FIG. 10 FIG. 11...
-
Page 12: Technical Characteristics Of The Electrical Components
SERVICING Always disconnect the appliance from the N.B. In case of substitution of the input cable, electricity main before proceeding with any the installer must keep the “earth” conductor servicing operation. longer than “live” ones, and must respect the cautions in paragraph “Electrical connection”. To reassemble the appliance repeat the inverse 6) REPLACING THE ELECTRICAL process. -
Page 13: Technical Data
TECHNICAL DATA MODEL 2 HEATING ELEMENTS (30) (1 HI-LIGHT + 1 HI-LIGHT WITH CONC. DOUBLE ZONE) Voltage 230 - 240/400 - 415 V 3N ~ Frequency 50/60 Hz Tot. rating 2900 W... -
Page 14: Technical Assistance And Spare Parts
TECHNICAL ASSISTANCE AND SPARE PARTS This appliance, before leaving the factory, has been carefully tested and regulated by expert and specialized personnel in order to guarantee the best performances. Any repairs or adjustments which may be subsequently required may only be carried out by qualified personnel with the utmost care and attention. - Page 16 This appliance is marked according to the European directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE). This guideline is the frame of a European-wide validity of return and recycling on Waste Electrical and Electronic Equipment.
Need help?
Do you have a question about the TRV602 NF and is the answer not in the manual?
Questions and answers