Frequently Asked Questions - Philips D140 User Manual

Table of Contents

Advertisement

Frequently asked questions

My handset displays [SEARCHING] or
[UNAVAILABLE], or [UNREGISTERED],
what do I do?
• Make sure that the base station has power
supply.
• The handset is out of range. Move it closer to the
base station.
• The handset is not paired with the base. Register
the handset to the base station.
If I fail to pair (register) the additional
handsets to the base station, what do I do?
• Your base memory is full. Access
[SERVICES] > [UNREGISTER] to unregister
the unused handsets and try again.
• If registration fails, unplug the power adapter
from the base station and plug it back. Wait for
15 seconds, and then repeat the registration
procedure.
I have chosen a wrong language which I
cannot read, what do I do?
1 Press
2 Press
3 The following options will appear on the screen:
[PHONE SETUP] > [LANGUAGE]
[CONFIG. TÉL] > [LANGUE]
[TEL.-SETUP] > [SPRACHE]
[CONF. TELEF.] > [LINGUA]
4 Select them to access the language options.
5 Select your own language.
>
My handset is in searching or unavailable
status, what do I do?
• Make sure that the base station has power
supply.
• Register the handset to the base station.
• Move the handset closer to the base station.
No display
• Make sure the batteries are charged.
• Make sure there are power and phone
connections.
to go back to the standby screen.
to access the main menu screen.
The battery discharges too fast.
• The battery is not fully recharged. Leave the
handset on the charging cradle for at least
8 hours or until the battery icon on the handset
stops scrolling and indicates full bar.
Bad audio (crackles, echo, etc.)
• The handset is nearly out of range. Move it closer
to the base station.
• The phone receives interference from the nearby
electrical appliances. Move the base station
away from them.
• The phone is at a location with thick walls. Move
the base away from them.
• The phone receives interference from the DSL
(digital subscriber line) connection. Install a DSL
filter to prevent the noise. Contact your service
provider for the DSL filter.
The handset does not ring.
Make sure the handset ringtone is turned on..
The caller ID does not display.
• The service is not activated. Check with your
service provider.
• The caller's information is withheld or
unavailable.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the D140 and is the answer not in the manual?

Subscribe to Our Youtube Channel

This manual is also suitable for:

D145

Table of Contents