1. Manuals
  2. Brands
  3. M-LOCKS Manuals
  4. Security System
  5. Bravo BR5010
  6. Technical manual

M-LOCKS Bravo BR5010 Technical Manual

Hide thumbs
1
2
3
4

Advertisement

Table of Contents

Technical manual
Mounting Instructions
BR5010

CHARACTERISTICS

The Bravo is a top reading electronic entry unit that provides easy operation for under-desk
safes as well as spy protection. The numbers can only be read up close by the operator. The
code numbers will not be "spied on" from a distance. The entry unit features a terminal for an
electronic key and/or audit. The integrated battery compartment in the bottom of the Bravo
entry unit opens by moving a slider. Cable length is approximately 30 cm. The Bravo entry
can be mounted as stationary or turnable model.

DIMENSIONS / MOUNTING INSTRUCTIONS

The terminal for the electronic key (Dallas Key) and or communication is located on the front
next to the LED. In case this terminal is not required, it should be covered with the provided
round black label.
This mounting instruction is part of VdS certification and has to be followed up
precisely.
M-LOCKS BV
Tel: +31 (0)314 376 876
Vlijtstraat 40
ver. 1.1 2010 07 19
Fax: +31 (0)314 376 878
NL-7005 BN Doetinchem
1
www.m-locks.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Bravo BR5010 and is the answer not in the manual?

Questions and answers

Related Manuals for M-LOCKS Bravo BR5010

Summary of Contents for M-LOCKS Bravo BR5010

  • Page 1 LED. In case this terminal is not required, it should be covered with the provided round black label. This mounting instruction is part of VdS certification and has to be followed up precisely. M-LOCKS BV Tel: +31 (0)314 376 876 Vlijtstraat 40 ver. 1.1 2010 07 19...
  • Page 2 Connect one (1) battery to the battery clip. Only use 9V ALKALINE Duracell/ Procell- or Energizer batteries. This mounting instruction is part of VdS certification and has to be followed up precisely. M-LOCKS BV Tel: +31 (0)314 376 876 Vlijtstraat 40 ver. 1.1 2010 07 19...
  • Page 3 (M4) hand tied. Insert first the spring and then the pin into the hole on the back cover Insert the grooved shaft all the way into the entry housing M-LOCKS BV Tel: +31 (0)314 376 876 Vlijtstraat 40 ver.
  • Page 4 Connect one (1) battery to the battery clip. Only use 9V ALKALINE Duracell/ Procell- or Energizer batteries. This mounting instruction is part of VdS certification and has to be followed up precisely. M-LOCKS BV Tel: +31 (0)314 376 876 Vlijtstraat 40 ver. 1.1 2010 07 19...

Table of Contents