Advertisement

Mercury RV Water Heaters
Duoetto MK2
Aqueous MK2
DUO-10/AQU-10
www.ausj.com.au
sales@ausj.com.au
P.O. Box 777, Leichhardt, NSW 2040
Last updated: 20/11/17
The most up-to-date version of the manual is available at www.ausj.com.au.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Duoetto MK2 and is the answer not in the manual?

Questions and answers

Summary of Contents for Aus J Duoetto MK2

  • Page 1 Mercury RV Water Heaters Duoetto MK2 Aqueous MK2 DUO-10/AQU-10 www.ausj.com.au sales@ausj.com.au P.O. Box 777, Leichhardt, NSW 2040 Last updated: 20/11/17 The most up-to-date version of the manual is available at www.ausj.com.au.
  • Page 2: Product Features

    Thank you for your purchase of the Duoetto MK2 Dual Voltage Water Heater! This device is approved to European Quality Standards, CE, AS/NZS 60335.2.21 : 2002 A1-3 and has obtained WaterMark certification. This unit is a simple system with high quality parts designed to meet your needs.
  • Page 3: Safety Cautions

    3. List of Technical Parameters DUO-10 AQU-10 AC240V DC12V AC240V Rated Volume (L) Rated Temperature (C) 30°C to 75°C 30°C to 70°C 30°C to 75°C Rated Voltage (V) 240V 240V Rated Power (W) 1000W 300W 1000W Rated Current (A) 4.2A 4.2A Rated Frequency (Hz) 50Hz...
  • Page 4: Installation

    Do not operate this device if the cord, feed or plug is damaged in any fashion. Don’t replace the safety valve with any unauthorized products. 5. Installation Installation is the responsibility of the buyer and the manufacturer does not bear the responsibility for any damages caused by incorrect installation, damage due to poor quality plumbing and parts, non-standard water or not following these instructions.
  • Page 5: Methods Of Usage

    Water temperature is adjustable from 30°C to 75°C on 240V. The Duoetto MK2 and Aqueous MK2 water heaters are auto thermostatic. They automatically cycle on and off when they reaches the set temperature. Operation of 12V Heating Mode: Standard heating, cycle on and off to maintain the set temperature.
  • Page 6: Guarantee Certificates

    DC LED: A blue light indicates 12V heating. It will turn off when the heater is being powered by 240VAC. Thermostat: The thermostat controls 240V heating. Over Temperature Protection: This protects the water heater from overheating. It disconnects a heating element from the network at temperatures in excess of 85°C (12VDC) or 90°C (240VAC). Safety systems cannot automatically reset.
  • Page 7 9. 12V Cable Length and Current Capacity Guide Current, Length (Twin) to area (sq mm) 12.6VDC, current carrying capacity(CCC)(top) then follows 5% volt drop to 70 sq mm.
  • Page 8 10. Safety Messages Under normal operating conditions: 1. The water temperature from the outlet pipe will not exceed 100°C. 2. When water reaches the pressure relief valve the water temperature will not exceed 93°C. 3. When the water temperature reaches 100°C the input energy would not exceed the energy released.
  • Page 9 Please fill in all details correctly. Retain this card with original purchase invoice for any future warranty claim. Please note in the event of this document and the original purchase invoice not being provided, warranty will commence from the date of manufacture. Owner’s Details: Surname……………………………………………………………………………..

This manual is also suitable for:

Aqueous mk2Duo-10Aqu-1

Table of Contents

Save PDF