Rockford Fosgate NP3401x Installation & Operation Manual page 8

fanatic P Crossover Connections
input from amp
fanatic X Crossover Connections
0dB
-3dB
0dB
0dB
-3dB
-3dB
fanatic Q Crossover Connections
0dB
-3dB
-6dB
(–)
black wire
(+)
black/white
striped wire
0dB
-3dB
input from amp
• Be sure to maintain speaker polarity
• Be sure to maintain speaker polarity
• 0dB tweeter level matches the ampli-
tude of the tweeter to the midrange
• –3dB tweeter level reduces the ampli-
tude –3dB lower than the midrange
(ideal for tweeters located high in door
panel and midranges located low in
kick panel)
• Replaceable Tweeter Protection Bulb
acts as a fuse to protect against overload.
If the bulb burns out, remove the burned
tweeter
out bulb and insert a new bulb (part#
HDW10932) into the retainer clips.
• Be sure to maintain speaker polarity
• 0dB tweeter level matches the ampli-
tude of the tweeter to the midrange
• –3dB/–6dB tweeter level reduces the
amplitude –3dB or –6dB lower than
the midrange (ideal for tweeters locat-
ed high in door panel and midranges
located low in the kick panel)
• 0°/180° tweeter phase matches the
phase response of the tweeter to the
midrange. Leave the switch in the posi-
tion that results in the best sound qual-
ity.
tweeter • Replaceable Tweeter Protection Bulb
acts as a fuse to protect against overload.
If the bulb burns out, remove the burned
out bulb and insert a new bulb (part#
HDW10932) into the retainer clips.
5
(+)
positive
(–)
Negative
tweeter