Advertisement
Quick Links
Advertisement
Summary of Contents for Hanover-Products X20FSEF-1BLK
- Page 1 Installation and Operation Instructions ELECTRIC FIREPLACE X20FSEF-1BLK...
-
Page 2: Table Of Contents
Important Safety Instructions Listing Approvals Operating Instructions Control Buttons/Functions Maintenance Trouble shooting... -
Page 3: Important Safety Instructions
CONSUMER SAFETY INFORMATION Read this manual before installing and operating this appliance. Failure to follow these instructions may result in electric shock, fire property damage, personal injury and will void the warranty. Requires the use of Fireplace Mantel. Do not store or use gasoline or other flammable liquids or vapors in the vicinity of this appliance. -
Page 4: Save These Instructions
12. All electrical heaters have hot and arcing or sparking parts inside. Do not use in areas where gasoline, paint, or flammable liquids are used or stored or where the appliance will be exposed to flammable vapors. 13. Avoid using the appliance with an extension cord. Extension cords may overheat and cause a risk of fire. -
Page 5: Listing Approvals
LISTING APPROVALS This heater has been tested in accordance with the CSA Standards. X20FSEF-1BLK Model Number: Voltage: 120V AC, 60Hz Watts: MAX 1500W Length: 19.7 28.9 Height: Depth: 12.6 . -
Page 6: Operating Instructions
OPERATING INSTRUCTIONS Read all instructions and warning prior to operating the appliance. Ensure that all control are in the "OFF" position before plugging the appliance into a properly grounded electrical outlet. The main switch is located at the top left corner on the front(see Figure 1) The main control buttons are located at the top right corner on the front(see Figure 1) Control Buttons Master Power Button... -
Page 7: Control Buttons/Functions
CONTROL BUTTONS/FUNCTIONS The manual controls are located on the bottom of the fireplace. You have the following controls: 1. Power ON/OFF: Power to the unit 2. Flame brightness controls: Allows you to adjust the flame to suit your mood.Press increase flame brightness and to decrease flame brightness.You must press the button... -
Page 8: Maintenance
MAINTENANCE WARNING: Before attempting to perform any maintenance on this appliance, turn all controls to the "OFF" position and unplug the heater. Allow the appliance to be "OFF" for at least 10 minutes before performing any maintenance in order to allow all components to cool properly. -
Page 9: Trouble Shooting
Care and maintenance: Turn heater OFF and unplug from electrical outlet before any cleaning or maintenance is performed. Keep combustible materials such as furniture, pillows, bedding, papers, clothing, and curtains at least 3feet (0.9meter) away from fireplace. Use a vacuum or duster to keep heat and vent area clean from dust and dirt. The exterior of the fireplace should be cleaned with a damp cloth or duster.