Setting-Up The Projector - Proxima Pro AV 9400L User Manual

POSITIONING:
THIS PROJECTOR SHOULD NEVER BE SET IN THE WAY
INDICATED. NEVER HANG THE PROJECTOR UPSIDE DOWN.
IT MAY RESULT IN FIRE HAZARD.
ROOM LIGHT
The projector should be placed in a room with
limited light. Picture quality will be directly
affected by lightning conditions.
Max. Zoom
Screen
Size
Min. Zoom
Distance
LEVELING AND ELEVATING ADJUSTMENTS
Two feet adjust the projection angle and leveling the
projector. The projection angle can be adjusted up to 4
degrees by rotating the two (left and right) feet located on
the bottom of the projector.
Level the projector by rotating the two feet.
DOWN
UP
UP
LEVELING/ELEVATION
FEET

SETTING-UP THE PROJECTOR

This projector is basically designed to project on a flat projection surface.
This projector can be focused from 4.9' (1.5 m) ~ 80.7' (24.6 m).
Refer to the figure below as an example when positioning the projector to the screen.
40"
77" 115"
40" 100"
77"
4.9' (1.5 m) 13.1' (4.0 m) 20' (6.1 m)
DOWN
Maximum Zoom
Minimum Zoom
300"
200"
150"
100"
231"
154"
DISTANCE
150" 200"
115" 154"
26.9' (8.2 m) 40' (12.2 m)
MOVE THE PROJECTED IMAGE POSITION
Adjust the projected image position (maximum 760mm
downward or upward on the 100" screen) by using lens shift
function. (See page 33.)
INSTALLATION
600"
400"
462"
308"
400"
300"
308"
231"
53.8' (16.4 m)
100"
SCREEN
600"
462"
80.7' (24.6 m)
7