Warning and
Alert Lights
Chapter 3 • Using the Desktop Projector
Factory Defaults
The first time you turn the Desktop Projector on, the initial
factory settings are used. If you change any of these settings, you
can recall all of the factory defaults by choosing FACTORY from
the SETTINGS function.
Warning and alert lights located on the projector's control panel
indicate the projector's operating condition.
Brightness
Volume
Menu/
Video
Figure 3-5
Warning lights
OVERTEMP Warning Light
The OVERTEMP light illuminates in the unlikely event that the
projector overheats. A thermostat automatically turns off power to
the lamp until the projector cools.
Sync
Lamp
Replace Lamp
Overtemp
Alert Light
Warning Light
User's Guide • 3–11