Advertisement
Quick Links
Advertisement
Summary of Contents for D3D BELL
- Page 1 IP/Network Doorbell Quick Installation Guide V3.2...
- Page 2 1. Doorbell Introduction 1. Front Panel 2. Back Panel...
- Page 3 2. Mobile app Installation & Registration A. Please install mobile app „D3Dbell‟ using one of the methods mentioned below Scan the below QR Code OR Search “D3Dbell” on APP Store OR Visit http://d3dsecurity.com/wifi-doorbell to download. For Android Users For iPhone Users B.
- Page 4 3. Configure Doorbell with Mobile Application 1. Power on the doorbell and wait for starting. (It will have the sound tip if the doorbell starts). 2. Please follow below steps carefully to easily setup doorbell with mobile application Tip: Ensure mobile phone and doorbell in same LAN 1.Open the D3Dbell app.
- Page 5 1. Open the D3Dbell app. Device ID can be found on Click on “+” on the top right and password and click the back of bell “Ok” button. and choose “Manual Add”. 3.2 Connect doorbell in same LAN with RJ45.
- Page 6 IP doorbell in 5 seconds. It means pairing succeed if selected music is played. 3. Two or more indoor bell pairing - Follow point 2 once again to get paired one by one. 4. All pairing memory clearance - Long press music button for 5 seconds.
- Page 7 6. Doorbell Installation...
- Page 8 7. Door Bell Function 2. Popup message from 1.Visitor press the Call APP, answer or hang up. button. 3. After answering, you can call intercom, take photos, open the door etc. Full duplex intercom call, which is more convenient to use.
- Page 9 Receive alarm message: Opened by default. If closed, user cannot receive messages and alarm push. Alarm push ID: Add the first mobile phone by default configuration for bell. Support Max. five accounts. Alarm push Email: Binding mailbox. Bell will send visitor call and alarm images to the mailbox.
- Page 10 Device Info: Display the current firmware information of the device. Date and Time: Set device time, the default automatic time synchronization network. Media Settings: Set image format (N/P) and reversal. Security Settings: Modify Admin Password. Network Settings: Switch the wired network and WiFi network. Alarm Settings: Configure the door phone alarm information.
Need help?
Do you have a question about the BELL and is the answer not in the manual?
Questions and answers