Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings, Install in accordance with the manufacturer’s instructions.
Page 3
WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PROCUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECT THROUGH THE VENTILATION GRILLS OR OTHER OPENNINGS ON THE EQUIPMENT. Apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus CAUTION EXPLANATION OF GRAPHICAL SYMBOLS...
Page 4
Disconnection Device Disconnect the main plug from the apparatus, if it’s defected. And please call a repair man in your location. When used outside of the U.S., it may be used HAR code with fittings of an approved agency is employed. CAUTION These servicing instructions are for use By qualified service personnel only.
Page 5
User’s Manual FCC Information (for U.S.A) Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
HDMI Splitter Important safety instructions Please read following recommended safety instructions carefully. Do not place this product on an uneven Do not install on a surface where exposed surface. to direct sunlight, near heating .equipment or heavy cold area. Prevent water or dust from the product. Do not attempt to repair this product yourself.
User’s Manual Contents Important Safety Instruction ······································································ 2 Contents ································································································ 7 English ································································································ 8 Control & Connection options ····································································· 8 Packages and accessories ······································································· 9 Remote control Unit ·············································································· 10 Insert battery ························································································ 10 Connection ··························································································· 11 How to use HDMI Splitter ········································································ 12 Troubleshooting for no power ···································································...
User’s Manual Packages and accessories ※ Contents are subject to change without prior notice. ※ Additional accessories should be purchased separately. ※ Digitalzone will not be responsible for any problems caused by using any other adopter we don't provide. ※ HDMI cable is optional accessories. ※...
HDMI Splitter Remote Control Unit ※ It’s possible to use a remote controller within 3~5m, 60 degree of angle scope. ※ You can use an extension receiver for a remote controller if it’s far away from the system. The receiver in the system will not work when the extension reciever is connected. - Turn the unit off before connecting the extension reciever.
User’s Manual Connection How to connect devices with splitter (- Input: Blu-ray Player, FHD/UHD Stream Generator, - Output: FHD/UHD TV) ※ You must use High Speed HDMI cable if you like to use Deep Color, High refresh rate and resolution above 2160p/60Hz. (720p/1080i/50~60Hz/Deep Color, 720p/1080i/1080p/100~120Hz High Refresh Rate) ※...
HDMI Splitter How to use HDMI Splitter 1. Power ON splitter. 2. Power on source players to use such as Blu-ray Player or FHD/UHD Set-top box, etc 3. Power on display devices 4. Choose one of the input no. for the source player to use. It’s possible to select the input number by touching the number button in the front panel or by pressing the button in the remote control unit.
User’s Manual Troubleshooting for no power - Check if LED light on the front is turned on. - Make sure the power cord connectors on both ends are firmly attached. Please refer to the webpage, www.dzonei.com for more detailed information for the troubleshooting USB (Firmware upgrade) &...
HDMI Splitter Front key Lock / Unlock setting Lock Lock Unlock Unlock Front Key Press the selected number in the front (① or ②) for 2~3 Lock seconds. After pressing ‘F’ key 3 times, and press all numbering keys Unlock (①->③->②->④) in order.
User’s Manual How to update System Firmware Connect a USB to your Computer. Format the USB. USB has to be formatted in FAT32 format Before (Recommended) updating Copy Newest firmware into the connected USB Memory. Firmware When the copy process is finished, remove the USB by Safety Remove (Recommended) How to Power on the HDMI splitter.
HDMI Splitter How to use EDID Emulation Mode 1. Dynamic mode Function Mode Summary Description Number Safety Intersection of all those display Normal configuration devices Video : Intersection of all those display devices MaxAudio Max audio Audio: it takes maximum value. Follow EDID information of the Copy 1st HDMI Port...
User’s Manual 2. Static mode Function Mode Summary Description Number Audio : 2Ch, PCM 1080i Force 1080i Video : 1080i/50,60Hz Audio : 2Ch, PCM 1080p Force 1080p Video : 1080p/50,60Hz Audio : 2Ch, PCM Force 4K Video : 2160p/30Hz or Equiv Audio : 2Ch, PCM 4K-6G Force 4K-6G...
HDMI Splitter Troubleshooting Guide for Splitters Please check the following before contacting the Customer Center for service. Status: When the TV screen does not show anything or is blinking Check List Measures Is the product 1) Connect the product to the cable correctly. connected to the HDMI 2) Replace the cable and connect the new one.
User’s Manual Specification Input 2EA(Model:HVS-6204 / HVS-6208) Output 4EA (Model:HVS-6204), 8EA(Model:HVS-6208) Remote Control RS232 Remote PC/ Device POWER : On / Off SYNC : Indication of valid input signal HDCP : HDCP being used (1.4 / 2.2) EDID : Emulation Being used...