Table of Contents
Advertisement
Chapter 6
TO
Beam information
using Bluetooth
Accept a Bluetooth
partnership
Receive beamed
information
Rename a Bluetooth
device
Synchronize using
Bluetooth
End a Bluetooth
partnership
Specify a folder for
received images from
the Image server
57
DO THIS
Make sure that Bluetooth is turned on and that the device that you want to beam to is
discoverable. Select the item that you want to beam and press Menu > Beam [item].
Select the Bluetooth device to which you want to beam the item and press Beam.
Make sure that Bluetooth is turned on and that your phone is discoverable. When
prompted to accept a Bluetooth partnership with the other device, press Yes. In PIN,
enter a personal identification number (PIN) between 1 and 16 characters, and press
Done. You must enter the same PIN that was entered on the device requesting the
Bluetooth partnership.
On the Home screen, press Start > Settings > Connections > Beam. Select
Receive incoming beams.
Do the following:
• To receive beams by using Bluetooth, ensure Bluetooth is turned on and that your
phone is discoverable and within close range.
Press Yes.
On the Home screen, press Start > Settings > Connections > Bluetooth > Menu
> Devices. Select the Bluetooth device to rename and press Menu > Rename. In
Name, enter a new name for the Bluetooth device, and press Done.
On the Home screen, press Start > ActiveSync > Menu > Connect via Bluetooth.
See "Using Bluetooth" in 4-5 Synchronizing with a PC for more information.
On the Home screen, press Start > Settings > Connections > Bluetooth > Menu >
Devices. Select the Bluetooth device with which you want to end the partnership and
press Menu > Delete.
On the Home screen, press Start > Settings > Connections > Bluetooth Profiles
> Image. In Default image directory, enter the desired directory for storing received
images.
Advertisement
Table of Contents
