Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Kodak SA101
Summary of Contents for Kodak SA101
- Page 1 Installation Guidelines for KODAK SA101 Alarm System...
- Page 2 CONTENTS Installing the central unit Pages 3 - 4 Home page Page 5 III- Central unit set-up Page 6 Installation and settings: Pages 7 - 13 cameras and accessories Using the scenarios Pages 14 - 16 Additional informations Pages 17 - 18...
-
Page 3: I- Installing The Central Unit
Installing the central unit 1. Download and install the free KODAK CONNECT application from your mobile phone. 2. Connect the gateway to your internet modem using the Ethernet cable provided with your alarm system, then plug the gateway in. 3. In the application, tap “+” to select your preferred gateway. - Page 4 4. The application will automatically detect the device ID number of your gateway. Please enter the name you want to give to the gateway, then tap “Next” 5. Enter a password, then tap “Save” NOTE: 1) The gateway must be always connected to your internet network via the Ethernet cable.
-
Page 5: Ii- Home Page
Home page : Panic button, in case of emergency 1 : Direct access to your cameras : Arm/Disarm button 2 : Access to scenarios : Record button 3 : Access to events 4 : Access to advanced settings... - Page 6 III- Setting the gateway On the home page, tap (settings) The Admin default password is 123456 You will be directed to the following page: Setting the gateway siren To add emergency contacts in case of alarm Setting the notifications you want to receive To select the cameras / accessories that you want...
-
Page 7: Iv- Installation And Settings
Installation and settings: cameras and accessories • ADD A CAMERA Kodak Connect application, tap In the Home page of your Then tap to add your camera... - Page 8 Switch your camera on, then tap “Next” to start the installation Select your Wi-Fi network (make sure that your network is on 2.4 GHz), then enter the related password and tap “Next” Wait then for 90 seconds for your camera to re-start Choose a name for your camera, then enter the password (default password 123456).
- Page 9 Camera set-up: When you are on the Live Video page of your camera, go to advanced settings (the Admin default password is 123456) You will be directed to the following page: To link your camera to To enable Google Drive automatic time (see next page) adjusting...
- Page 10 3) If you connect the camera via an Ethernet cable, you can switch to wireless network through the advanced settings menu. 4) If you have already used your camera with the KODAK SECURITY application, make sure you make a RESET before connecting it to the KODAK CONNECT application.
- Page 11 You can also delete the camera from the Cloud Storage account in order to stop using Google Drive as the way to store on the cloud. In this case, the video files will be saved on the SD Card. • ADD AN ACCESSORY In the Home Page of the KODAK CONNECT application, tap...
- Page 12 Select the accessory that you would like to add (here we take the example of a door contact switch) Choose a name for your accessory, then tap “Next”. Tap “Pair” and follow the instructions. Your accessory is paired with your central unit.
- Page 13 Summary table of potential notifications according to camera settings Note: The camera is set with a default “Armed” mode Kodak Connect “Armed” mode Result Disarmed Camera unticked Recording Disarmed Camera ticked Recording Armed Camera unticked Recording Alarm from the central unit +...
-
Page 14: V- Using The Scenarios
Using the scenarios To access the scenarios, tap in the Home Page Red = Scenario enabled White = Scenario disabled Create a scenario Tap + Click on the Choose another accessory to create accessory a scenario) - Page 15 Red = accessory enabled Black = accessory disables If you have a KODAK Camera, you can create a scenario by using the Preset function. This function enables you to record different points that the camera will focus on if any accessory is triggered.
- Page 16 You have now reached the Preset settings of the camera. This function enables video recording in different points (usually where your accessories have been installed). To do so, orient your camera towards the point that you want to select and tap 1. Proceed in the same manner with the next points. Now to link the various points of your camera with the accessories (door contact switches, sensors, detectors, etc.), go to the Scenario page as follows: 1- Select the accessory that you want to link...
-
Page 17: Vi- Additional Informations
Additional information 1 – To enable the SOS mode via the remote control, tap the button for 3 consecutive seconds. 2 – All notifications are displayed in English language, whatever language has been selected, due to the software used in this application. Examples of notifications: è... - Page 18 4- You can change the picture of your system. To do so: When you are on the Home Page of the KODAK CONNECT system, make a long press on the square box, tap to select a picture, then choose a picture in your gallery.
Need help?
Do you have a question about the SA101 and is the answer not in the manual?
Questions and answers