TCL 49S403 User Manual page 124

theater receiver that is also sending an audio and video signal into the TV. Using
®
HDMI ARC reduces the number of cables needed and optionally lets you control the
volume and mute state of the receiver by enabling system audio control.
®
HDMI ARC is disabled by default. To enable HDMI
navigate to Settings > System > Control other devices (CEC), and then highlight HDMI
ARC. Press OK to enable or disable the feature.
Note: Enabling HDMI ARC also enables System audio control . After enabling HDMI ARC ,
you can disable System audio control if you prefer.
Enable system audio control
System audio control enables the TV remote control to change the volume and mute
state of an amplifier or sound bar connected through HDMI
external device's volume and mute status in the TV's on-screen display.
The TV automatically turns off its internal speakers and sends volume and mute
control signals to an external amplifier when all of the following are true:
•
System audio control is enabled on the TV.
•
The TV is connected to a CEC-compatible amplifier, it is powered on, and CEC
discoverability is enabled.
•
The CEC-compatible amplifier's HDMI
HDMI ARC connector with a suitable HDMI
When the CEC-compatible amplifier is off, the TV automatically turns on its speakers
(unless you have turned them off as described in
resumes local control of volume and mute state.
To enable or disable system audio control, in the Home screen menu, navigate to
Settings > System > Control other devices (CEC) and highlight System audio control. Press
OK to enable or disable the feature.
®
ARC, in the Home screen menu,
®
, and to display the
®
ARC connector is connected to the TV's
®
cable.
Turning off the
116
speakers) and