Advertisement
Advertisement
Table of Contents
Summary of Contents for Volfoni SmartCrystal Pro VPSP-10000
-
Page 1: Quick Start Guide
Quick Start Guide model VPSP- 10 000... - Page 2 INSTALLATION & QUICK LAUNCH This section is independent of the rest of the manual. It is intended for advanced users who want to install the SmartCrystal Pro™ Booster quickly without reading all the information in the manual. For optimal use of the product, it is recommended to follow the manual in its entirety.
- Page 3 Configuring the projection position : « Throw Ratio » (TR) Before any installation, it is important to ensure that the device is compatible with the configuration required. The "Throw Ratio" ("Throw Ratio ', TR) must satisfy the following requirements: THROW RATIO > 0,55...
- Page 4 Fixing & Position • The SmartCrystal™ Pro Booster shall be placed on a stable surface with 4 screws. • The SmartCrystal ™ Pro Booster should be placed in front of the projector lens. There is a "Projector Side" serigraphy on the product that will indicate the correct direction.
- Page 5 • Connect the sync cable (BNC - BNC, BNC - 3 pin Mini DIN) on the 3D sync output of the projector and the 3D Sync Connector on the SmartCrystal Pro™ Booster • Plug the power cable and the Ethernet cable if necessary to SmartCrystal Pro™...
Need help?
Do you have a question about the SmartCrystal Pro VPSP-10000 and is the answer not in the manual?
Questions and answers