PROLED L513178 User Manual page 8

Connecting RF remote controller with RF receiver:
a. Connect the RF-receiver according to wiring diagram. Receiver is not part of delivery.
Please order separately, for example L513170 or L513176.
b. Switch the RF remote controller by touching ON/OFF button.
c. Press learning key (Learning) at receiver.
d. Press desired zone button on the remote controll.
e. Connected LED blink to confirm zone connection
f. A longer press (>5 sec.) on learning key untill LED blinks confirms, that ID will be deleted.
If you use multiple receivers, you have two choices:
Option 1: All the receivers are in the same zone, for example zone 1
RF LED Receiver
Learning Key
Option 2: All receiver are in different zones, for example zone 1, 2, 3 or 4
RF LED Receiver
Learning Key
Zone 1
MBN GmbH, Balthasar-Schaller-Str. 3, 86316 Friedberg - Germany
07.17. Technical amendments reserved
Note: Before the first use, please remove the protective film from battery.
RF LED Receiver
Learning Key
Zone 1
RF LED Receiver
Learning Key
Zone 2
www.proled.com
Bedienungsanleitung / User's manual
Back side
RF remote
Learning Key
Zone 3
RF LED Receiver
RF remote