Download Print this page

Xenon OSSC03700 User Manual

Advertisement

Quick Links

WARNING:
the risk of serious injury, read these
warnings before using the scooter.
1. Read and follow all instructions.
2. It is the owner's responsibility to
ensure that all users of the scooter
are adequately informed of all
warnings and instructions.
3. Inspect the scooter and tighten or
replace any loose or missing parts
before each use. In addition, make
sure that the handles and the stem
are securely locked in position, the
wheels rotate freely, the brake is in
working order and free of all debris,
and the wheel bolts are secure.
4. The scooter should not be used by
children under the age of eight. A
responsible adult must always
supervise young riders.
5. Always wear protective equipment,
including a helmet, knee pads, wrist
guards, elbow pads, and closed-toed
shoes, when using the scooter.
6. Never ride on streets, roadways, or
driveways that enter vehicle traffic
routes. Never ride on wet or uneven
surfaces, at night, or when visibility
is poor.
7. Never tow a rider with a bicycle,
motorcycle, or vehicle.
8. Locate the warning decals on the
scooter, and read the warnings
before using the scooter.
9. Save this User's Manual for future
reference.
10. This scooter should not be used by
persons weighing more than 200
pounds.
11. Braking from high speeds or pro-
longed braking on inclines can cause
excessive wear of the rear wheel and
brake. Exercise caution when select-
ing your area of use.
12. To prevent burns, avoid touching the
brake after prolonged use.
To reduce
Model No. OSSC03700
User's Manual

Advertisement

loading

Summary of Contents for Xenon OSSC03700

  • Page 1 Model No. OSSC03700 WARNING: To reduce the risk of serious injury, read these warnings before using the scooter. 1. Read and follow all instructions. 2. It is the owner’s responsibility to ensure that all users of the scooter are adequately informed of all User’s Manual...
  • Page 2 Setup Depress the lock pin on the left side of the deck (see the drawing below). Pivot the upright up until it locks into a nearly vertical position. Turn the release knob clockwise until it is tight. Insert the handles into the stem until the lock pins are visi- Handle ble in the holes in the stem.
  • Page 3 Ordering Replacement Parts To order replacement parts, call toll-free 1-800-999-3756, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays). When ordering parts, please mention the model number (OSSC03700) and the number and description of the parts needed.
  • Page 4: Brake Maintenance

    Adjusting The Quick Release If the quick release doesn’t hold the stem snug in place, you Open Close will need to adjust it. Quick Release Open the quick-release lever. Turn the adjustment nut clockwise one half turn while keeping the lever from turning. Close the lever.