Table of Contents
Advertisement
4. USAGE AND OPERATION
2.3 Temperature setting
In the main interface，press"
temperature flashes, then press"
decrease it.
"can save setting parameter and back to the main interface；
Press"
MODE
SET
"can not save setting parameter but back to the main interface； Attention：
Press"
If there is no operation for 5s，system would remember parameter setting and
back to the main interface.
For example:
TEMP
IN
TEMP
IN
2.4 Clock setting
In the main interface，press"
increase value or press"
At the same time, minute start to flashing ，press"
" to decrease value，and press"
"can not save setting parameter and back to main interface.
Press"
Attention：If there is no operation for 5s system will remember parameter setting and back
to the main interface.
For example：
"or"
"to increase the temp.value, or press"
Press"
C
or"
MODE
TEMP
SET
OUT
Press "
C
to save value
MODE
TEMP
SET
setting
OUT
"to decrease value，and
"to save setting.
" and the current mode target-
Heating target temperature
"
SET
TEMP
"
TEMP
OUT
Press"
"to change the value
or"
MODE
"
SET
SET
TEMP
TEMP
OUT
" twice，Hours start to flashing ，and press"
"to save setting；
"to increase value or
11
"to
C
MODE
SET
"
C
MODE
SET
to
Advertisement
Table of Contents
