Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Blackbox Manuals
  4. DVD Player
  5. VIDEO FRAME 12
  6. Product manual

Blackbox VIDEO FRAME 12 Product Manual

Hide thumbs
1
2
3
4

Advertisement

Quick Links

Download this manual
Enlarged version
PARTS DIAGRAM
Monitor Status LED
12 Activation
Buttons
Volume -/+
General Specifications
Video storage medium:
Maximum SD Card capacity:
Maximum number of videos:
Playable Format:
Audio Output:
Content Formats
Video :
Still Picture:
Audio:
Codec:
Weight - 18kg
23" Screen
Speaker x 2
Master Volume Control
(clockwise to increase)
SD/Player Access
(4 star screws for access)
1 SD Card
4 Gb
12 folders / 4gb
.Mpg1 / .JPG / .MP3 / .AVI
Stereo
MPEG 2 (720 x 480, 30fps PAL)
JPEG (1280 x 608px, 300DPI)
44.1kHz Stereo, 224kbit/s
MPEG 2 (.mpg), JPEG (.jpg

WALL MOUNTING

There are two ways of fixing the video frame to a wall.
1) Using a screen bracket (provided) - this is an easier option although there will
be a gap between the unit and the wall. If you would like the unit to sit flush
with the wall you will need to follow the instructions below for option 2.
2) Use incorporated mounting holes, to fix the Video Frame 12 you will need to
take the unit apart and fix through the 4 holes in the rear of unit.
1.
Ensure that the power is disconnected.
2.
Place the unit flat, (screen face down) using some bubble wrap to avoid
scratching.
3.
Remove the 10 screws around the edges of the unit. (3 on each side and 2 on
the top and bottom.)
4.
Seperate the back from the front - see diagram above.
5.
Fix the seperated back to the wall using the 4 holes indicated in the diagram
above .
6.
Re-attach the front to the back and replace the 10 screws around the edges
of the unit. (3 in each side and 2 in the top and bottom.)
7.
Reconnect the power.
VIDEO FRAME 12
VIDEO PRODUCT MANUAL

Advertisement

loading
Need help?

Need help?

Do you have a question about the VIDEO FRAME 12 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Blackbox VIDEO FRAME 12

  • Page 1: Wall Mounting

    2. 23" Screen 2) Use incorporated mounting holes, to fix the Video Frame 12 you will need to Monitor Status LED take the unit apart and fix through the 4 holes in the rear of unit.

  • Page 2: General Information

    Button Layout You can download a template from the Video Frame 12 page on our webstie. You can use the 12 buttons in any configuration that you want depending http://blackboxav.co.uk/product-downloads/vf12/VF12-template.pdf upon what content you are displaying.

  • Page 3: Remote Control Buttons

    REMOTE CONTROL BUTTONS OPTIMAL PLAYBACK VIDEO FRAME 12 VIDEO PRODUCT MANUAL POWER ON/OFF MUTE MUTE Volume ON/OFF Image Playback VGA:1280X720 output （Factory settings:VGA:640X480） VIDEO Video output: For YPbPr and CVBS selection For optimal image playback we recommend images to be 1080 x 608 pixels at DISP Displays the current time in the top right corner of screen.
  • Page 4 PUTTING CONTENT ONTO THE PLAYER TIMER POWER SETUP VIDEO FRAME 12 VIDEO PRODUCT MANUAL Once you have edited and converted your video or images into the correct A useful feature of the VF12 player is that you can programme it to power up format you will need to put them onto a SDHC card.