850921 HDMI Signal Manager 850921 User Manual HDMI 1.4 Signal Manager TLS electronics GmbH Contact: info@tls-electronics.de...
Page 2
850921 HDMI Signal Manager Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference. SURGE PROTECTION DEVICE RECOMMENDED This product contains sensitive electrical components that may be damaged by electrical spikes, surges, electric shock, lightning strikes, etc.
850921 HDMI Signal Manager Introduction TLS HDMI 1.4 Signal Manager can work in two modes, one mode for extracting the audio via Coaxial and stereo outputs from HDMI source, and the other mode for removing the original audio of HDMI source and embedding auxiliary audio via L/R input to the HDMI output.
850921 HDMI Signal Manager Panel Descriptions Front Panel 1. L/R In--- Analog stereo auxiliary audio input 2. HDMI Input---Connect to HDMI source device 3. DC 5V--- Connect to 5V/1A power supply 4. LED indicator for HDMI input---Lit when detecting HDMI signal 5.
850921 HDMI Signal Manager Application Diagram Specifications Bandwidth 2.97Gbps per color Video Input Connectors 1x HDMI Type A, 19-pin, female Audio Input Connectors 1x 3.5mm stereo jack (L/R) Video Output Connectors 1x HDMI Type A, 19-pin, female Audio Output Connectors 1x RCA(SPDIF), 1x 3.5mm stereo jack (L/R)
TLS electronics products are warranted against defects in material and workmanship for three years from the date of shipment. During the warranty period, TLS electronics will, at its option, repair or replace products that prove to be defective. Repairs are warranted for the remainder of the original warranty or a 90 day extended warranty, whichever is longer.
The warranty does not apply to any part of a product that has been installed, altered, repaired, or misused in any way that, in the opinion of TLS electronics, would affect the reliability or detracts from the performance of any part of the product, or is damaged as the result of use in a way or with equipment that had not been previously approved by TLS electronics.
In the event the product returned to TLS electronics has been discontinued (i.e. the product is no longer being manufactured by TLS electronics but is still under warranty), TLS electronics will, at its discretion, either repair or replace with recertified product.
Page 11
Shipping your RMA to TLS electronics using regular mailing envelopes is not acceptable, as they do not protect the product from damage during shipping. TLS electronics will not repair or replace a module that is shipped in such a way that the product is not properly protected.
Need help?
Do you have a question about the 850921 and is the answer not in the manual?
Questions and answers