Advertisement
Quick Links
Dear Customer:
Congratulations on the purchase of your new weather station clock. And many thanks for your
choose our products. This is a 5-day weather forecaster product. Please read this instruction
manual carefully before using. Thanks.
Carefully open and check that the following contents are completed:
1) base station (the receiver)
2) thermometer sensor(the transmitter)
3) USB
4) CD-ROM
Display Icon of the receiver:
1
3
2
4
11
12
13
14
15
Descriptions
1.The display of current day weather
2.The highest temperature display of current day(℃/℉)
3.The lowest temperature display of current day(℃/℉)
(The display temperature is the city which you chose from the internet.)
4.Time display (update from the computer)
5. Month and date
6. Day of week
433MHz Wireless 5-day Weather Forecaster
6
7
8
9
○
S
16
1
5
18
10
17
Advertisement
Summary of Contents for ZHANGZHOU JIMEI ELECTRONIC CO. H997
- Page 1 433MHz Wireless 5-day Weather Forecaster Dear Customer: Congratulations on the purchase of your new weather station clock. And many thanks for your choose our products. This is a 5-day weather forecaster product. Please read this instruction manual carefully before using. Thanks. Carefully open and check that the following contents are completed: 1) base station (the receiver) 2) thermometer sensor(the transmitter)
- Page 2 7. UVI intensity indicator:0-17 phases; whenever over the 17 phase, displaying “＞18” 8. The indoor temperature of current condition(℃/℉) 9. The outdoor temprature of current condition(℃/℉) 10. The indicate of internet (“E” displaying means online; “E” flashing means register for; “E” disappeared means offline) 11.
- Page 3 4. current Temperature 5. Hanging hole 6. Locknut 7. Standar 8. Test key (no function) 9. Channel selection key (no function) 10. battery compartment case 11. Waterproof loop 12. Swift key of ° C/° F STEP ONE: BATTERIES Insert the batteries in the transmitter unit before you set up the main unit. Do not use rechargeable batteries. 1) The outdoor transmitter is a waterproof design.
- Page 4 3) Click the “NEXT” key then the screen showed as picture (3): 4) Click the “Install” key then the screen showed as picture(4): Now choose the city you’re living on.If you couldn’t find that city name among the options, just choose the next one as you like.
- Page 5 7) Then insert the USB correctly into the computer helping to receive the newest signal, as picture (6): the transmit The USB interface 8) Double click the run-program to choose whichever city you'd like to know about the weather, then click the “OK” key. As picture (7): Now, installation is finished.
- Page 6 French,FR Dutch,NE Spanish,ES Denmark,DA ﹡When setting the date, the weekday will be automatically set. ﹡After setting and if you do not operate within 20 seconds, it would return to time mode. 2) Alarm setting 2.1 ALARM1 setting 2.1.1 At time mode, press the “MODE” key to enter into R1 setting mode. The LCD display: 0 : 00 : A1. Hold the “MODE”...
- Page 7 On the transmit: “TEST”: at normal mode, press the “TEST” key once is of no effect. When detecting, hold this key or reset, the transmit enter into RF detecting mode. It transmits very 2 seconds frequencyly. The RF detecting mode will exit when resetted or inserted the batteries again.
- Page 8 For a Class B digital device or peripheral, the instructions furnished the user shall include the following or similar statement, placed in a prominent location in the text of the manual: NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.