Advertisement
Operating Instructions
Hand crimp tool PEW 9.1128
6 Warranty
EN
The hand crimp tool is subjected to a thorough quality control process.
General warranty conditions apply.
7 Service and maintenance
Before starting work, ensure that the hand crimp tool is clean and in proper working order.
Crimping residue must be removed. Joints should be regularly oiled with a light mineral oil and
protected against contamination. It must be ensured that all bolts are secured by means of
securing rings. As a rule, all repairs to the wire end ferrule crimping tool must be performed
by the tool manufacturer or an authorised service centre. Please contact the dealer where
you purchased your tool.
Rev.: 2014-06-02
5 / 5
Advertisement
