Operating Instructions Hand crimp tool PEW 9.1128 Operating Instructions Hand crimp tool PEW 9.1128 for HFBR-connectors Art.-No. 619 1128 3 1 Before starting any work, read these operating instructions! Rev.: 2013-06-02 1 / 5...
Page 2
Operating Instructions Hand crimp tool PEW 9.1128 Table of contents General Intended use Description Application / Crimping procedure Emergency unlocking Warranty Service and maintenance Rev.: 2014-06-02 2 / 5...
Page 3
Operating Instructions Hand crimp tool PEW 9.1128 1 General Keep the Operating Instructions with the hand crimp tool at all times. This hand crimp tool features state-of-the-art technology and complies with recognised safety regulations. The crimp tool may be used only in a technally fault-free condition, in a safety-conscious manner with consideration given to potential hazards, and may be used only for the purpose described in the Operating Instructions.
Page 4
Operating Instructions Hand crimp tool PEW 9.1128 4 Application / Crimping prodedure · Open the tool · Select the necessary positioner, lift it and turn it in the right position until it locks (figure 2) · Insert the HFBR connector in the corresponding position (figure 3) ·...
Page 5
Operating Instructions Hand crimp tool PEW 9.1128 6 Warranty The hand crimp tool is subjected to a thorough quality control process. General warranty conditions apply. 7 Service and maintenance Before starting work, ensure that the hand crimp tool is clean and in proper working order.