Bosch B20CS30SNS Instructions For Use And Installation page 23

5. Take the new filter cartridge out of its packaging
and remove the safety cap.
6. Insert the new filter cartridge and carefully turn it
90° clockwise as far as the stop e.g. with a spoon.
Note:
The filter cartridge must be tightened by hand so that
no leaks are created and that the appliance is correctly
supplied with water.
7. Refit the lid and snap it into place.
8. Turn on the water supply to the appliance.
9. Switch on the appliance.
10.Draw off several liters of water from the water
dispenser. This will remove any air from the water
system.
11.Pour the water out of the old filter cartridge. The filter
cartridge can be disposed of together with the
normal household waste.
12.Press and hold the "Light/Filter" button for
3 seconds. That resets the water filter indicator. The
symbol will then stop flashing. The new filter has
now been activated.
Note:
The ice and water dispenser can also be used without
a water filter. In that case, fit the cover cap.
en-us
23