RMS caddy Installation And User Manual page 2

INTRODUCTION
RMS Ltd would like to take this opportunity of thanking you for choosing a
caddy Seating System. We are confident that it will meet with the necessary
seating requirements of the user for which it was prescribed.
From the time of its initial conception, the caddy Seating System has undergone
rigorous strength testing and quality inspections, including successful "Crash
Testing" to ISO 16840-4 standard using a 50Kg ATD.
In view of the wide range of wheelchairs into which the caddy Seating System
can be interfaced, the pictures in this manual may not depict identically the
components supplied, or the location positions of installation for your specific
application. They are intended however, for general guidance purposes only and
to assist a suitably qualified person to install and adjust a complete caddy
Seating System.
RMS Ltd reserves the right to change, without notice, the design, methods of
manufacture, or any materials used in the construction of the caddy Seating
System, where it considers such changes will serve to improve the product
quality, or become necessary to meet any changes in device legislation.
Should the reader have any concerns regarding the installation, set-up,
adjustment, or use of the caddy Seating System, please contact the RMS Ltd.
Technical Help-Line on 01795-477280.
CONTENTS
Introduction
Safety Guidelines
Component Identification
Initial Installation:-
Seat and Backrest Identification (Positive Locking style)
Seat and Backrest Identification (Standard style)
Seat Base Installation (Using lock & Latch interfacing)
Installing Lock & Latch
Seat Base Installation (Fixed/Bolt-on Interface)
Backrest Installation (Positive Locking style)
Backrest Installation (Standard style)
Backrest Remove/Refitting and Angle Adjustment
Backrest Height Adjustment
Pelvic Supports
Lateral Thoracic Supports
Accessory Tricep Pads and Shoulder Pads
Accessory Headrest and Mounting
Alternative Pelvic Supports and Accessory Knee Adductors
Accessory Leg Abductor (Pommel)
Upholstery Care and Maintenance
Transportation
Warranty Statement
General Information, Product Maintenance and
Page
2
3
4
5
6
7
8
8/9
10/11
12/13
13
14
15
15 and 19
16
17
18
19
20
21
22-24
25
Inspection Record 26
2
USER / CARER NOTES
27