Juguetronica ROBOTRON MINI Instruction Manual page 3

INTRODUCTION
slide forward
switch mode
rotate to
the left
slide back
raise
volume
talk
INSTALACIÓN DE LAS PILAS REMOTE CONTROL FUNCTION
1) TURNING ON AND OFF
In order to turn on the robot, use the front button.
When ROBOTRON MINI starts to move, it will start to emit sounds and make movements
that can be stopped with the 'stop' button on the remote control. After a few seconds, if not
interacted with, it will go into standby mode.
2) STANDBY MODE
If the robot does not receive any orders, it will emit a series of six sounds every 20 seconds. After
emitting the last sound, it will go into standby mode. To get off the standby mode, press the top
button on ROBOTRON MINI's chest.
3) WALKING FORWARD
Upon pushing the 'avanzar' (forwards) button, the robot will take a few steps forwards, emitting
a sound with each step.
4) WALKING BACKWARD
After pushing the 'retroceder' (backwards) button, the robot will start to take some steps
backwards. In addition, it will emit a sound
with each movement.
6088-JUG0317-ROBOTRON-MINI-manual-english-17.indd 3
switch mode
rotate to
demo
the right
lower
volume
dance
24 LED lights
push forward
turn right
turn left
back up
stop any
action
3)
Motion sensor
On / off
4)
3
22/08/2017 17:59:51