Compressor Protection - Honeywell RTHL3550 Owner's Manual

Built-in compressor protection
This feature helps prevent damage to
the compressor in your air conditioning
or heat pump system.
Damage can occur if the compressor is
restarted too soon after shutdown. This
feature forces the compressor to wait a
few minutes before restarting.
During the wait time, the display will
flash the message Cool On (or Heat
On if you have a heat pump). When
the safe wait time has elapsed, the
message stops flashing and the
compressor turns on.
Battery replacement
Install fresh batteries immediately when
REPLACE BATTERY begins flashing.
The warning flashes about two months
before the batteries are depleted.
Replace batteries once a year, or
when you will be away for more than a
month.
If batteries are inserted within two
minutes, the time and day will not
have to be reset. All other settings are
permanently stored in memory and do
not require battery power.
Insert fresh AA alkaline
batteries, then reinstall
battery holder.
Inside
Fan
Auto
Press down and pull to
remove.
Replace
Battery
14
Cool
Setting
Cool On
System
Cool
MCR32596
MCR32597