Advertisement
This port replicator is a proprietary optional expansion module used for connecting your
notebook. This user's guide tells you how to use this external device for your notebook PC.
Connecting the Port Replicator
When you connected a peripheral device to port replicator,
the same connecters on notebook PC must be disable or plug-off.
You can easily attach this device to the notebook by following the steps below.
1. Be sure the notebook and any other peripheral devices you may have connected to the
notebook are turned off.
2. Connect the port replicator to the expansion connector which is located the rear side of
the notebook.
3. Slide the latch to the left to latch the port replicator.
1.
Before you connect the port replicator to the notebook PC, please close the
compartment cover located the rear side of the notebook PC first.
2.
After connecting the port replicator, you should not use those connectors which are
located the notebook PC at the same time. If you use these ports simultaneously, the
I/O ports on the notebook PC will not be workable.
U
'
G
S E R
S
U I D E
Figure 1-1 Port Replicator
CAUTION
!
2
Advertisement
