Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for SCT HE05BT
Summary of Contents for SCT HE05BT
- Page 1 HDMI / DVI / VGA over IP system User Manual...
- Page 2 Index Features: ........................1 Application and Installation View: ................2 Panel View: ........................ 4 Video Output Setting: ....................5 LED Indication Status: ....................5 RJ45 LED Indication Status: ..................5 Rotary Switch Function: ..................... 6 Panel Button Function: ....................6 Cable &...
-
Page 3: Features
Built in Bi-Directional analog audio transmission (only in unicast mode). l Built in Bi-Directional IR extension. l HE05BT/HKM01BT/DKM01BT/VKM03BT transmitter unit built in HDMI/HDMI/DVI/VGA local loop output. l HKM01BR/VDKM01BR receiver unit with 4 ports USB devices (1 port USB 1.1 & 3 Port USB 2.0), to extend USB peripheral devices, such as flash disk, hard disk, keyboard, mouse, etc. -
Page 4: Application And Installation View
HDV Over IP Series : ITEM NO. Video Interface Resolution RS232 Analog Audio Extender Control HE05BT HDMI 1080p Unidirectional HKM01BT HDMI 1080p Bi-Directional DKM01BT 1920x1200 Bi-Directional VKM03BT 1920x1200 Bi-Directional HE05BER HDMI 1080p Unidirectional HE05BR HDMI 1080p Unidirectional HKM01BR HDMI 1080p... - Page 5 Multiple TX to One RX r Connection: (KVM Switcher over IP) One TX to Multiple RX Connection: (Splitter) Optional Model: (order separately) SR01 Signal Repeater Extend data signal for an additional 120meters. Application for HKM01B,DKM01B,VKM03B signals for extra long range transmission. Ability to cascade connection with multiple SR01 for long range transmission Built in LED status indication.
-
Page 6: Panel View
Panel View: Transmitters HE05BT HKM01BT DKM01BT VKM03BT Receivers HE05BER HE05BR HKM01BR VDKM01BR... -
Page 7: Video Output Setting
Video Output Setting: VDKM01BR support both DVI and VGA dual output, default is DVI output only. You could either change the output setting before power on or in using as follows: 1. To change the output setting before power on, please press and hold below buttons and then plug the power, release the button after 1 or more seconds (about 30 seconds to boot). -
Page 8: Rotary Switch Function
Rotary Switch Function: Transmitter and receiver must setting at same channel in order to do mutual transmission. Rotary switch to be follow 16 HEX, could switch “ 0 ~ F “ total 16 channels, A = channel 10, B = channel 11, others channel same as 16 hex conversion. -
Page 9: Cable & Transmission Distance
USB Hot Key Function: (Not available for HE05BT/HE05BR/HE05BER) In multicast mode support multi USB keyboard and mouse in each receivers, just plug and play, but only one USB FLASH drive / hard disk could be used at same time. -
Page 10: Remote Control Function
Remote Control Function: If you do not use PC computer management to setup receiver, then you could use the IR infrared remote control to preset channel selection. Using the IR remote control to the front of receiver will be ok. Initial at first time use the remote control or after change battery of remote control, the IR remote control and the equipment Remote ID must be using same ID. -
Page 11: Remote Control Operation
Remote Control Operation: Select Channel: Mode 1: use select channel and wait 3 seconds, or press ENTER immediately to confirm. Mode 2: enter the channel number and press ENTER to confirm the input channel. Select Function: Mode 1: use p or q select function, press ENTER to confirm. Mode 2: press ENTER, then input function number as below, press ENTER to confirm. - Page 12 System Information Casting mode, version information, continuous uptime Network Information Status of link, MAC, IP, Host IP address Channel Information Current/last channel, expansion, compatibility Device No Information Show device, group, party number IR & Button Information Status of IR remove ID, IR remote, IR extender, button RS-232 Assign Information Status of RS-232 assign mode, channel, IP, token timeout Communication Information...
-
Page 13: Rs-232 Assign Mode
RS-232 Assign Mode: (Not available for HE05BER) System default setting of RS-232 is extender mode, the connection topology same as the channel ID. RS232 ports of receivers only connect to the transmitter with same channel ID as below diagram. This mode suitable for direct RS232 transmission between Tx and Rx. Network Switch RS-232 Not Assign to Any Channel Video... - Page 14 After the receivers and transmitter you want to keep RS232 connection established then press IR remote button MENU, 2, 8, ENTER to enable RS232 assign mode. ★ If you switch to a not available channel the RS232 connection will be cut and lose control, the RX will switch back to assigned channel after 3 seconds automatically to keep RS232 connection ★...
- Page 15 Command and Parameters List: Parameters Command Function Response 0 ~ 99 (Channel No.) OK = Setting successful CHANNEL Select Channel ? (display setting) ERROR = Setting fail 0-9 (Remote ID No.) OK = Setting successful REMOTE_ID Set Remote ID ? (display Remote ID No.) ERROR = Setting fail OK = Setting successful BUTTON...
- Page 16 ※ The maximum of OSD_ON is 30 characters, not support comma sign 「,」 , colon 「:」 and double quotation marks「”」, some characters must use \x## format to display, ## means the characters number in ASCII HEX code e.g.: \x0a is line feed, \x28 is ( brackets sign, \x22 is “ sign Example: >CMD_M1234>...
-
Page 17: Caution
Caution: 1. Transmitter/receiver boot time require 30 seconds 2. Transmitter must be reboot to apply channel setting by hardware rotating switch 3. Not recommend to work with existing LAN connection to avoid large video, data transmission or multicast packets to slow down your other LAN devices. 4. -
Page 18: App Control Function
APP Control Function: APP name: Remote Control Center (Basic control as IR remote for end user ) Google Play Download Link https://play.google.com/store/apps/details?id=sct.com.remotecontrolcenter iTunes Download Link https://itunes.apple.com/us/app/remote-control-center/id929873260?l=zh&ls=1&mt=8 Google Play Download QR code iTunes Download QR code APP name: Remote Control Center PRO (Advanced control for installer) Google Play Download Link https://play.google.com/store/apps/details?id=sct.com.remotecontrolcenterpro... -
Page 19: Web Setting Function
Web Setting Function: System provide detail settings over web browser, you could input the IP address of transmitter / receiver at link column of browser if you know the exact IP address of them. There are four ways to get the IP address of receiver: 1. -
Page 20: Bonjour Plug-In Installation
Bonjour plug-in installation: a. Click “BonjourSDKSetup.exe” to install Bonjour plug-in for Internet Explorer. b. Click “Next” to continue. c. Click “I accept the terms in the license agreement” to continue. d. Click “Next” to continue. - Page 21 e. Click “Install” to start installation. f. Click “Finish” to exit installation. g. Right click on “My Network Place” à “Properties” then right click on “Local Area Connection” à “Properties” then double click on “Internet Protocol (TCP/IP)” to setting as below: (IP address 169.254.111.111, sub mask 255.255.0.0)
-
Page 22: Login In To The Web Setting
Login in to the web setting: Use CAT5 cable to connect transmitter/receiver RJ45 port to PC LAN port, direct input known IP address of TX/RX, or open IE browser then select View à Explorer Bars à Bonjour. Double click on “HTTP on ast2-gateway(transmitter)” or “HTTP on ast2-client (receiver)”, it will pop up web setup in Bonjour windows as below: Click Network page you will see the IP address of transmitter/receiver... -
Page 23: System Menu
System Menu: Version Information Firmware version information Update Firmware Update system firmware Utilities System tools Factory Default Set system to factory default Reboot Reboot system Default EDID Set EDID to default Console API Command Run Console API command Statistics System status Channel expansion: To use channel expansion function (CH.0 ~ CH.99)，please use DEVICE MANAGER program which included in package for quick setting, or copy and paste below command in bold at System... - Page 24 CHANNEL MULTICAST IP HOSTNAME_ID CHANNEL MULTICAST IP HOSTNAME_ID 225.0.101.111 1111 225.0.131.011 31011 225.0.100.111 0111 225.0.130.011 30011 225.0.101.011 1011 225.0.131.101 31101 225.0.100.011 0011 225.0.130.101 30101 225.0.101.101 1101 225.0.131.001 31001 225.0.100.101 0101 225.0.130.001 30001 225.0.101.001 1001 225.0.131.110 31110 225.0.100.001 0001 225.0.130.110 30110 225.0.101.110 1110 225.0.131.010...
-
Page 25: Network Menu
Example: Set transmitter to CH.8: ast_send_event -1 e_stop_link ; astparam s multicast_ip 225.0.101.110 ; astparam s hostname_id 1110 ; ast_send_event -1 e_chg_hostname ; astparam save ; ast_send_event -1 e_reconnect Set transmitter to CH.63 : ast_send_event -1 e_stop_link ; astparam s multicast_ip 225.0.130.000 ; astparam s hostname_id 30000 ;... -
Page 26: Functions Menu
Functions Menu: For transmitter: Video over IP: This function setup the video signals send from network, default is checked. Please note it will turn off HDMI output of receivers in same channel if this function be disabled, only analog audio output For Receiver: Video over IP: This function setup the video signals send from network, default is checked. - Page 27 USB over IP Setup: (not available for HE05BT/HE05BR/HE05BER) This function setup the USB signals send from network, default is checked. Operation Mode: USB device operation setting, default is “Auto select mode” In Unicast mode recommend set to “Active on link”.
-
Page 28: Package
Package: HE05BT Package Include: Transmitter x 1 IR emitter cable x 1 DC 5V 2Amp power adapter x 1 Software CD x1 HKM01BT / DKM01BT / VKM03BT Package Include: Transmitter x 1 USB A to B cable x 1 IR emitter cable x 1... -
Page 29: Specification
Specification: HE05BT ITEM NO. HKM01BT DKM01BT VKM03BT 480i / 480p / 720p / 1080i / 1080p @ 24Hz、25Hz、30Hz、50Hz、60Hz Support Resolution CAT.5e：150M / CAT.6：180M (Max) Transmission Distance USB Connector USB Type B x 1 RS232 Connector DB9 (Female) x 1 DVI-I x 1 (29 Pin)
Need help?
Do you have a question about the HE05BT and is the answer not in the manual?
Questions and answers