Advertisement
Removing
the freezer basket.. .
For proper arc movement,
keep the freezer bat; - (
in place
when the refrigerator
IS
operatrng
To remove
the basket:
To replace
the basket:
l
Slide out to the stop.
l
Place basket on the slides.
l
Lift the front to clear the stop.
l
Slrde out the rest of the way
l
Make
sure the wire stops
clear
the front of theslides
l
Slide basket in.
Moving the meat pan.. .
The meat pan can be taken out and moved
the
same way as the shelves Remove the meat pan frrst.
Removlng:
I. Slide the meat pan out to stop.
2. Lift the front of meat pan.
3. Slide pan the rest of the way out.
4. filt cover up at front
5. Lift up at back
6. Pull straight out.
Replaclng:
I, Guide
the rear hooks into the slots in the shelf
supports.
2 Tit up front of cover until rear hooks drop Into slots.
Lower front of cover to level position.
3. Replace
meat pan in reverse order.
Changing the light bulb...
WARNING:
Before
removing
the light
shield
for
cleaning
or for replaclng
the bulb,
1. Push lightly on the top center of the lrght shield until
the notched
tab unhooks from the control panel.
either
unplug
refrigerator
or discon-
2 Pull down on the shield until the tab clears the con-
nect
electricity
leading
to
re-
trol panel.
frigerafOr
at the main power
supply.
3 Loft the back hooks out of their slots.
Shock
and injury
can occur
if elec-
triclty
remains
connected.
4 Replace
with a 40-watt appliance
bulb.
5 Replace
lrght shreld in reverse order.
Push in the Center;
Pull Down.
Removing the base grille...
To replace:
Support
labs
2 Pull grille outwards
as shown
1 Line up grille support tabs wrth metal clips.
3 Do not remove
Tech sheet fastened behind grille
2 Push firmly to snap into place.
3 Close the doors.
Ice cube trays.. .
If cubes are not used, they may shrink The moving
cold air starts CI slow evaporation
The longer cubes
are stored the smaller they get
To remove
ice:
1 Hold tray at both ends
2 Slightly twist
7
Advertisement
