Do you have a question about the Wireless video intercom and is the answer not in the manual?
Questions and answers
Subscribe to Our Youtube Channel
Summary of Contents for Oz-View Wireless video intercom
Page 2
Oz-View Technical Manual V1.02 - 1 Jan 2011...
Page 3
Thank you for purchasing our professional wireless video door phone system. Before carrying out the installation, please read this user's manual carefully and follow all the guidelines during the process of Installation and operation. Contents Features Components checklist Products description Handset cradle Charger fixing procedure Button description...
Please read important information on page 16 This power adaptor is optional. You can select the in-line PSU power adaptor for professional engineering installation. Kindly refer to page12 for details. Oz-View Technical Manual V1.02 - 1 Jan 2011...
“Di Di”, then release the button and it will enter the coding status. 3).If the handset monitor shows the letters “success” within 8s, the coding is Oz-View Technical Manual V1.02 - 1 Jan 2011...
” buttons at the same time when the 2nd handset monitor is in ON status until the screen shows “receive code”, then release the buttons and enter the “receive code” status. Press the “ ” button Oz-View Technical Manual V1.02 - 1 Jan 2011...
(A total 12 ring tones are available for selection). After choosing your favorite tone, press the “ ” button to confirm, or wait until the playing tone is ended, then it will auto-exit. Oz-View Technical Manual V1.02 - 1 Jan 2011...
1).In standby status, when a visitor presses the call button on call station, then the power indicator will still light. 2).a. If not receiving a response signal within 4S, then it will sound “Di Di Di Di”, Oz-View Technical Manual V1.02 - 1 Jan 2011...
Page 12
Handset intercom (Paging): 1).In standby status, if the user presses the “ ” in one handset monitor, then the red indicators will light and enter the call status. The screen will display Oz-View Technical Manual V1.02 - 1 Jan 2011...
【Shadow cards 1】 【Shadow cards 20】 ,then all the user cards will be deleted. During this period, if you press the initialization button again or wait for 30S Oz-View Technical Manual V1.02 - 1 Jan 2011...
3). The 3rd unlocking time is 8S. With power disconnected, press and hold the call button on call station, and connect power to the call station. When you hear three “Di Di Di” tones, release the call button and the unlocking period will be Oz-View Technical Manual V1.02 - 1 Jan 2011...
5).Use screws to fix the door station on the rear installation panel. Wiring of in-line PSU power adaptor 1).Check and keep the power in OFF status. Oz-View Technical Manual V1.02 - 1 Jan 2011...
3).Connecting the AC line to AC INPUT terminal and DC line to DC OUTPUT terminal. (be careful of the AC. DC terminal to avoid of wrong connection) 4).Cover the front cover of call station Lock connection Oz-View Technical Manual V1.02 - 1 Jan 2011...
The above marked time is in the specific situation and atmosphere Use the authorized charger only Do not disassemble the batteries Do not short -circuit the batteries Do not expose the batteries to extreme hear, fire or water Oz-View Technical Manual V1.02 - 1 Jan 2011...
Clean, soft, dry cloth can be used to clean the products. 4).Please install the products according to this instruction manual to avoid of damaging to the products. Guarantee One-year warranty. Oz-View Technical Manual V1.02 - 1 Jan 2011...
Need help?
Do you have a question about the Wireless video intercom and is the answer not in the manual?
Questions and answers